Promise TX4310 SATA RAID5 Controller

Forum on data and disk backup and restore, partition imaging and cloning, and drive copy.
Forum rules
Discussion on the R-Drive Image software

Promise TX4310 SATA RAID5 Controller

Postby GeekMaster » Thu Feb 26, 2009 10:15 am

Can your software access;
1) Promise TX4310 SATA RAID5 Controller, chipset is a PDC40719?
2) Promise SATA TX4 300, chipset is a PCD 40718?
3) Promise SATA TX2 Plus, chipset is a PDC20775?

I use all of these cards in my computers at work so I am looking for a viable Imaging software which will work with these controllers. Also, if your software doesn't see a particular controller, do you have a way of loading a driver through either a FLOPPY or USB drive such as when you press F6 during Windows installation. Specifically like when you need to add the controller's driver to the Windows setup.

GeekMaster
GeekMaster
 

Re: Promise TX4310 SATA RAID5 Controller

Postby Alt » Thu Feb 26, 2009 10:35 am

If you are asking about the Windows version of R-Drive Image, it will access any hard drive controller visible by Windows.
If you are asking about the Startup version of R-Drive Image, I'd rather make a test: create a startup CD and test whether it sees the controllers or not.
See http://www.r-tt.com/downloads/Drive_Image_Manual.pdf - > Advanced Disk Actions -> Create Startup Disks.
You may download and install R-Drive Image Demo and test that during the evaluation period of 15 days: http://www.drive-image.com/
Alt
Site Moderator
 
Posts: 2163
Joined: Tue Nov 11, 2008 2:13 pm

Re: Promise TX4310 SATA RAID5 Controller

Postby Micropter » Thu Mar 19, 2009 6:31 am

Confirmed, working on TX4310 ;)
Micropter
 
Posts: 7
Joined: Tue Mar 17, 2009 5:20 pm


Return to Data Backup and Restore

Who is online

Users browsing this forum: No registered users and 0 guests