RStudio4 on SuSE linux?

A forum on data recovery using the professional data recovery software R-STUDIO.
hvdosten
Posts: 2
Joined: Mon Aug 06, 2018 1:58 pm

RStudio4 on SuSE linux?

Post by hvdosten » Mon Aug 06, 2018 2:10 pm

Hi,

I installed RStudio4 on SuSE linux 12 via:

rpm -Uhv RStudio4_i386.rpm

When I start the program, it asks for the administrator password. After this, I can see jumping the program-thumbnail for about 30 times. After this nothing happens.

What is missing on my laptop?

I then tried RStudioEmg8.iso and installed it on a bootable USB disk. First, everything works fine. But then it asks me for the activation code. I got it from your site, but I can not put it in the mask, because on my laptop there is just a "software keyboard", and of course this is not invoked by booting the system from the USB. Moreover this laptop has just one USB-port which is used by the stick...


Any small hint is very appreciated.

Thanks a lot

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: RStudio4 on SuSE linux?

Post by Alt » Tue Aug 07, 2018 4:07 pm

A USB hub could help for the last situation.
Well, for the first one, please contact our techsupport. Most likely, this is a hardware incompatibility.

hvdosten
Posts: 2
Joined: Mon Aug 06, 2018 1:58 pm

Re: RStudio4 on SuSE linux?

Post by hvdosten » Wed Aug 08, 2018 12:52 am

thanks a lot for your reply. I tried the hub, but obviously the system doesn't boot the USB stick...

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: RStudio4 on SuSE linux?

Post by Alt » Thu Aug 09, 2018 11:43 am

hvdosten wrote:
Wed Aug 08, 2018 12:52 am
thanks a lot for your reply. I tried the hub, but obviously the system doesn't boot the USB stick...
But contacting our techsupport is still an option.

Post Reply