recovered file isnt working
Posted: Sat Aug 22, 2009 12:39 pm
long story short....
-my cousin tried to reinstall winxp with original winxp sp1 disk, believed that i installed a "fake" windows xp that already has xp3 in it
-in windows setup with the original winxp sp1 disk, showed the 3 drives with the same size (the real sizes are 2 500gb drives and one 280gb drive, that already had windows xp sp3 nstalled)
-deleted the "C:" partition, when creating new partition, asked to format it
-started formatting "D:" partition up to 3%, then turned off the computer
-idk why it started formatting "D:" i would guess that it probably rearranged the drives somehow
-he told me "dont wry about it, done it a million times"
so after that, reinstalled the "fake" windows sp3 that he believes its fake
and after installing R-studio, and scanning the damaged drive (500gb, D: drive), i see that the "recognized1" is yellow, and all my files are there
after trying to recover one of the pictures, the log would say..
!Recover Start position of file (294305943552) is outside filesystem size (137426010624) while recovering (location of recovering file). Try to recover this file using all recognized partitions.
XRecover Restoring file (location of recovering file) the operation was failed
iRecover 0 of 1 were successfully recovered
the size of the file would show on r-studio, but when it was recovered, it would say "0 bits" and it wouldn't show the preview
I tried to find the option to "recover this file using all recognized partitions", couldn't find it
please help
(sorry for so much info, thought it might help you guys understand it better)
-my cousin tried to reinstall winxp with original winxp sp1 disk, believed that i installed a "fake" windows xp that already has xp3 in it
-in windows setup with the original winxp sp1 disk, showed the 3 drives with the same size (the real sizes are 2 500gb drives and one 280gb drive, that already had windows xp sp3 nstalled)
-deleted the "C:" partition, when creating new partition, asked to format it
-started formatting "D:" partition up to 3%, then turned off the computer
-idk why it started formatting "D:" i would guess that it probably rearranged the drives somehow
-he told me "dont wry about it, done it a million times"
so after that, reinstalled the "fake" windows sp3 that he believes its fake
and after installing R-studio, and scanning the damaged drive (500gb, D: drive), i see that the "recognized1" is yellow, and all my files are there
after trying to recover one of the pictures, the log would say..
!Recover Start position of file (294305943552) is outside filesystem size (137426010624) while recovering (location of recovering file). Try to recover this file using all recognized partitions.
XRecover Restoring file (location of recovering file) the operation was failed
iRecover 0 of 1 were successfully recovered
the size of the file would show on r-studio, but when it was recovered, it would say "0 bits" and it wouldn't show the preview
I tried to find the option to "recover this file using all recognized partitions", couldn't find it
please help
(sorry for so much info, thought it might help you guys understand it better)