Scan freezes

[bigmorty]

Same problem. I've been stuck at 12% for six hours. It seems to be crawling through the sectors at the agonizing rate of about 600 per minute, throwing the "analysis timeout" error every 50 seconds or so.

Did this ever get solved?

[Alt]

Same problem. I've been stuck at 12% for six hours. It seems to be crawling through the sectors at the agonizing rate of about 600 per minute, throwing the "analysis timeout" error every 50 seconds or so.

Did this ever get solved?

Are there possible hardware problems with the drive being analysed?

[alan1]

I am also encountering this issue. After 240.73 GB (504850448 sectors) or so of scanning a raid array, the program throws an exception. An exception window appears stating the program could not allocate memory. While I was trying to gather information, it looks like something tries to restart as the window gets dismissed. Had the monitor not been on or had I not been near the monitor, the message window is easily been missed. I did have the text log turned on, but it appears that the exception information is not written to the text log either. And the exception occurrance does not appear in the log window. Shortly after the window disappears, the "NTFS scan thread has been restarted" messages begin to appear in the log window and the program appears to hang.

The machine is a Intel Atom D510 with 2GB of RAM. It is running Windows Server 2003 R2 and has 8GB of swap configured. When the problem occurred, the memory window shows Process Memory Used 1016.93, Free 1.01 GB, Limit 2.00 GB; System Memory Physical Used: 1.16 GB, Free: 847.85MB, Limit 1.99GB; System Memory Swap Used 1.02GB, Free: 4.82 GB, Limit 5.84 GB. The program's memory usage is set to disabled memory control in the settings.

[Alt]

Please, contact our techsupport with this problem. They'll help you to solve it.

[rick92]

I've had the exact same problem, it skips around +200 sectors every 50 seconds in that block, it's been stucked just around 400MB back for 10 hours: please, help me