Part I
R-Studio for Linux 5.4.191371 Mon Oct 14, 2024
Improvements
* Detection of broken hi clusters for FAT32 has been improved.
* Detection of simlink loops have been improved.
* The re-enumeration speed for disks with bad sectors has been increased.
* A veeam backup image (VBK) signature has been added to the Known File Types.
Bugfixes
- Automatic detection of RAID parameters couldn't be interrupted.
- The second password dialog box didn't appear when a wrong password for an encrypted APFS/ACS volume was entered. Fixed.
- Files with names starting with two dots (..) may have been marked incorrectly. Fixed.
- Several possible crash causes have been cured.
R-Studio for Linux 5.4.191336
Bugfixes
- The program may have frozen during executing the Show Files command to process symlinks on Unix file systems. Fixed.
- When processing files on a remote computer, the program always warned about possible file overwriting, even when there was no such files. Fixed.
- Several possible crash causes have been eliminated.
R-Studio for Linux 5.4.191332 Mon Jul 08, 2024
Improvements
* An animated indicator has been added to the List of running tasks.
* A link to the task being performed has been added to the The program is busy: the operation task is in progress message in the Technician version.
Bugfixes
- The repeated window for password for APFS/ACS didn't appear when a wrong password was entered. Fixed.
- It was possible to overwrite an existing file if a file with the same name but without an extension was specified when the Save to a binary file... command was issued from the Info on locked drive window which appeared after entering the Get info on locked drive... command for a decrypted partition. Fixed.
- It was impossible to resume image creation if the image file (except for a runtime one) was completed with some skipped sectors failed to read by a timeout. Fixed. It's possible now to resume image creation using multi-pass imaging with the Retrying phase on.
- A possible cause for memory leak has been eliminated.
- Several cosmetic bugfixes.
R-Studio for Linux 5.4.191325 Fri Jun 14, 2024
New features
Technician/T80+
+ Multitasking. Several different tasks can be performed simultaneously. For example, you can create a multi-pass image using a third-party hardware, scan a disk image, and recover files from another image, all at the same time. The number of concurrently performed tasks depends only on the computer efficiency (CPU, RAM, HDD/SSD, etc). Each task runs in its own tab and can be controlled individually. Computer shutdown takes place when all tasks are completed. The list of running tasks is displayed on the Main panel in the lower left corner.
+ Hidden devices. Devices that are not subject to scanning for data recovery can be hidden from the Main panel (System disks, devices for storing recovered data, etc). Such hidden devices are still accessible for storing recovered files, logs, scan info, etc.
Improvements
* Information about saving system info and for times of recovery list export has been added to the Log.
* Runtime imaging can be started from the Create image dialog box in the Technician/T80+ versions.
* R-Studio can now use an already existing sector map to continue image creation, even if the drive attributes (its vendor, product name, GUID, or serial number) don't match the image ones. The drive size should always match.
* Image display in File Previewer has been improved.
Changes
= In the R-Studio Standalone and Corporate versions, running tasks are now shown in a tab.
= A new layout for the Settings window.
= Detailed, simple, and none scan views have been removed from the Scan dialog box
Bugfixes
- Bad sector rating for files on partitions inside APFS containers didn't work. Fixed.
- The program confused / and \ (acceptable for file paths on the EXT* file systems) in file path separators when importing recovery file lists. Only / is now used as a path separator in recovery file lists.
(/)
- There was a spare attribute File Type for folders in the Get Info tab. Fixed.
- Exported file recovery lists in the HTML format may sometimes have been broken. Fixed.
- R-Studio for Linux incorrectly processed XFS partitions with 4K sectors. Fixed.
- Folder cross-links were processed incorrectly for XFS file systems for inode numbers larger than 2^32. Fixed.
- Some bitmap files couldn't be identified by using search for Known File Types. Fixed.
- Some files couldn't be recognized by their file signatures when their beginnings looked like a text file and were close to the previous text files. Fixed.
- Valid jpg files were split into two invalid parts when their previews in their exif parts were on the sector boundaries. Fixed.
- Hexadecimal Viewer/Editor may have incorrectly saved large quantity of data. Fixed.
- Several internal bug fixes.
- Several crash causes have been eliminated.
- A lot of cosmetic bugfixes.
R-Studio for Linux 5.3.191269 Wed Jan 24, 2024
Improvements
* "Recheck recovery chances" has been improved for existing files.
Bugfixes
- The HTML template for file recovery lists was corrupted in R-Studio 9.3.191268. Fixed.
It's necessary to export it again to correctly customize it.
- R-Studio crashed when files from images were exported into a file recovery list from tabs others than Real. Fixed.
- No warning about enabled runtime imaging appeared when R-Studio was closed. Fixed.
- Some minor cosmetic bugfixes.
R-Studio for Linux 5.3.191267 Tue Dec 26, 2023
New features
The Technician/T80+ version
+ Some means to open deleted encrypted volumes have been added. This is especially useful for encrypted APFS volumes.
Improvements
* The Unlock encrypted drive dialog box shows now the BitLocker's Recovery Key Identifier.
* The compression speed has been increased for the rdi image type.
* Support for unicode symbols in the upper range (greater than FFFF) like Chinese symbols, emoji, etc has been improved.
Bugfixes
- The Known File Types button on the Scan dialog box may have become disabled when the Extra Search for Known File Types option was disabled. Fixed.
- R-Studio may have occasionally crashed when an old flash device was changed to a new one. Fixed.
- It was impossible to select a remote computer in the BitLocker's Select external key file dialog box (the Unlock by key file... and Load from a binary file... buttons). Fixed.
- Files with default names were incorrectly processed while saving logs, system dumps, etc. Fixed.
- When a flash drive was disconnected from, and a new flash drive was connected to, a remote computer, Open file... dialog boxes showed the old flash drives until it was clicked. The Refresh button didn't help. Fixed.
- The Ctrl+R key shortcut (Refresh) didn't work. Fixed.
- The program may have crashed when the Enable Write option in the Settings was changed when the Hexadecimal Editor/View was running. Fixed.
- Some cosmetic bugs have been fixed.
The Technician/T80+ version
- There were discrepancies between final data on the Finished multipass imaging window and data in the Log. Fixed.
Hexadecimal Viewer/Editor
- Autocorrection in Hexadecimal Viewer/Editor didn't correct knowingly incorrect numbers entered on the Search dialog box. Fixed.
R-Studio for Linux 5.3.191246 Wed Oct 04, 2023
New features
+ Support for the ReFS 3.10 file system.
+ Support for Bitlocker Drive Encryption. R-Studio can decrypt both BitLocker Drive Encryption and BitLocker ToGo volumes using either a password, recovery key, and a .bek file. R-Studio Technician/T80+ can also use FVEK (Full Volume Encryption Key) or VMK (Volume Master Key) data for decryption.
+ Support for VHD/VHDX/VDI disk image formats. All R-Studio versions can load these files, R-Studio Corporate and Technician/T80+ can create them.
+ Read-only support for the dmg files (Apple Disk Image: all versions ), e01/(ewf) files (Expert Witness File Format: R-Studio Technician/T80+), and aff files (Advanced Forensic Format: R-Studio Technician/T80+).
+ Support for creation of encrypted RDR image files (the main disk image format for all R-TT, Inc products).
+ Support for SCSI/NVME translation for external USB/NVME boxes. Among other things this makes it possible to obtain S.M.A.R.T. attributes for such devices.
Improvements
* NTFS deduplication processing has been improved.
* Passwords can be shown in their dialog boxes.
* It's now possible to mark/unmark empty folders through Find/Mark dialog box using the Mark All/Unmark All command.
* R-Studio now shows multi-pass imaging statistics after the imaging process is completed.
* All data from the Properties tab can be copied in one command.
R-Studio Technician/T80+
* Multi-pass Imaging Phases can be enabled/disabled on-the-fly.
* Symlinks can be exported to custom recovery lists either as real folders or as symlinks.
* Search for files has been added to the HTML custom recovery lists.
Changes
= New icons for storage devices.
Bugfixes
- The program might have crashed when showing unicode symbols in the upper range (greater than FFFF) like Chinese symbols, emoji, etc. Fixed.
- The program may have frozen rarely while opening ext fs partitions. Fixed.
- R-Studio couldn't correctly load multi-file images if their parts are located in different places. Fixed
- R-Studio may have aborted data recovery when the Skip button was clicked under some rare circumstances. Fixed.
- Files with the question mark "?" in their names could not be saved to files recovery lists. Fixed.
- Bad sectors weren't saved to mask presets. Fixed.
- A progress bar may have rarely crashed under specific circumstances: closing dialog box and showing a warning message at the same time. Fixed.
- Sometimes, the device root wasn't marked as Root which led to problems in moving around files. Fixed.
- Folder-links may have been marked incorrectly when a recovery lists with file IDs was loaded. Fixed.
- Moving around links to folders which are actually files may have been incorrect. Fixed.
- Several bugs connected with symlink processing on UNIX file systems have been fixed.
- Detection of cyclic symlinks may have been incorrect. Fixed.
- Links in the program couldn't be opened. Fixed.
- Some cosmetic and minor internal bugs have been fixes.
R-Studio for Linux 5.2.191161 Fri May 26, 2023
Bugfixes
- Several cosmetic bugs have been fixed.
R-Studio for Linux 5.2.191149 Fri Apr 14, 2023
New features
+ Data storage types (SSD, HDD, USB, etc) info has been added to the Drives pane.
+ Search/mark/mask can be specified by bad sectors.
+ All S.M.A.R.T. attributes can be copied through one action (The Copy All button on the S.M.A.R.T. panel).
+ The Options tab is added to the Wiping progress indicator.
R-Studio Technician:
+ Search/mark/mask can be specified by runtime imaging status.
+ The creation time and accessed time data has been added to the forensic report.
+ New file formats for recovery lists have been added: HTML, XML, JSON, and CSV. The new formats, especially the HTML one, allow the customers to easily edit recovery lists in their web browsers and then send edited lists back.
+ Disk scan has become available during multi-pass imaging.
+ A completed runtime image can now be either resumed or re-written.
+ A new option "Skip files with bad sectors" has been added to runtime imaging of individual folders/files.
+ A new option "Unused clusters only" has been added to the multi-pass and complete runtime imaging options.
Improvements
* Any files from Extra Found Files will not be recovered if there are their duplicates in the file systems (Root) when the Do not recover duplicate files from Extra Found Files option is selected. Earlier this option took effect only for recovered files.
* Several tabs can now be moved by dragging them with the mouse.
* Processing of various non-printable characters in file names has been improved.
* Hints for shortcut menu items are now shown in the status bar.
* Search for and opening of file regions is now faster.
* Last used paths are now saved in several new fields.
* The Cross link info has been added to the Get Info panel.
* Saving and loading of Broken File Name and Hidden Attribute parameters have been improved.
R-Studio Technician:
* Progress display for the I/O monitor window has been improved.
* A data grid has been added to the I/O Monitor window.
* A color scheme and legend have been improved on the I/O Monitor window.
* A sector map window may be opened directly from the message about successful opening the sector map file.
* Speed for runtime imaging of individual files has been significantly increased, especially for many small files.
Changes
= Save/Load File Names menu items and commands have been renamed to Export/Import Recovery List.
= The FileID files parameter was moved to the top control box on the Find/Mark dialog box.
Bugfixes
- Bad sectors and Runtime image parameters could not be included into file mask presets. Fixed.
- The program may have crashed when the same partition got reopened in the same tab. Fixed.
- Several states of Recovery Chances may have been found incorrectly for FAT file systems. Fixed.
- The program may have crashed during multipass imaging with reverse reading and enabled scan. Fixed.
- An incorrect message "There is nothing to process using the specified settings" may have appeared when the disk object had bad sectors. Fixed.
- Data read speed was enormously slow for multipass imaging of FS only with reverse reading. Fixed.
- The program may have crashed when an unmounted CDROM drive was selected. Fixed.
- Data form the drive's first sectors wasn't included into the image when creating an multipass image of FS only with reverse reading. Fixed.
- Files were not always recovered from the Find Results pane. Fixed.
- Many cosmetic buxfixes in R-Studio and R-Studio Agent.
- The I/O Monitor window showed incorrect info after resizing. Fixed.
- An unnecessary message about post actions may have appeared in email notifications. Fixed.
- User's file type file may have been ignored during program startup. Fixed.
- R-Studio showed ? in names in links as small squares. Fixed.
- R-Studio couldn't find formatted exFAT partitions when they contained only root folders (without subfoders) and their roots was rewritten. Fixed.
- Unstable sectors were treated as bad. Fixed.
- An unnecessary tooltip may have appeared in the I/O Monitor window. Fixed.
- Sometimes incorrect marks may have appeared in the top level of the folder tree. Fixed.
- Incorrect data may have appeared in the Accessed Time column. Fixed.
- Some fixes in the algorithm of recovery chances estimation.
- The path to runtime image was processed incorrectly for runtime imaging on its dialog box. Fixed.
- Hardlinked files may have been recovered incorrectly. Fixed.
- The Estimated size value on the Create Image dialog window may have not changed when the Compression ratio slider was moved. Fixed.
- Files/folders with non-Latin names were not marked after recovery lists were loaded. Fixed.
- No read indicator (R) was shown on the I/O Monitors window while skipping slow areas. Fixed.
- All S.M.A.R.T. icons changed to green after a runtime image was connected. Fixed.
- Names of files which contained something similar to HTML tags may have been shown incorrectly. Fixed.
- Nothing was selected for the Copying mode options on the Smart drive copy tab in Drives Copy Wizard. Fixed.
- It was possible to clear the Enable write option even when runtime imaging was activated. Fixed.
- The program may have crashed when file sorting tabs were switched. Fixed.
- The Runtime image status and Bad sectors columns were sorted incorrectly. Fixed.
- Reaction to incorrect Empty Space Size values in the RAID reconstruction module was dubious. Fixed.
- Bad sectors and Runtime image parameters could not be included into file mask presets. Fixed.
- The program may have crashed when the same partition got reopened in the same tab. Fixed.
- Several states of Recovery Chances may have been found incorrectly for FAT file systems. Fixed.
- The program may have crashed during multipass imaging with reverse reading and enabled scan. Fixed.
- An incorrect message "There is nothing to process using the specified settings" may have appeared when the disk object had bad sectors. Fixed.
- Data read speed was enormously slow for multipass imaging of FS only with reverse reading. Fixed.
- The program may have crashed when an unmounted CDROM drive was selected. Fixed.
- Data form the drive's first sectors wasn't included into the image when creating an multipass image of FS only with reverse reading. Fixed.
- Files were not always recovered from the Find Results pane. Fixed.
- Exported file recovery lists in the HTML format appeared broken if there were file names with quotes invalidating the HTML format. Fixed.
- Many cosmetic buxfixes in R-Studio and R-Studio Agent.
R-Studio for Linux 5.1.191061 Sat Nov 26, 2022
Bugfixes
* R-Studio may have gone into an endless loop when opening large ext fs partitions. Fixed.
R-Studio for Linux 5.1.191044 Fri Sep 16, 2022
Improvements
* Discovery of symlink targets has been improved.
Bugfixes
- R-Studio may have crashed when a file or folder was selected. Fixed.
- A previous file name may have appeared in a file path field together with a default file path. Fixed.
- Sometimes default file names may have not appeared in their respective fields. Fixed.
- Sometimes a query mark may have appeared instead of the Root text. Fixed.
R-Studio for Linux 5.1.191031 Mon Aug 15, 2022
New features:
The following items have been added:
+ A new command Close All Images to close all opened images.
+ Support for the XFS file system;
+ Support for Intel Software RAIDs;
+ Data wiping for drives.
Additionally for the Technician versions:
+ Runtime imaging for individual folders/files;
+ Imaging of drive's file system (FS map) only;
+ Drive and file maps for all supported devices;
+ Drive imaging to a physical drive rather than to an image file;
+ New file hash functions sha1 and sha256 to forensic logs;
Improvements:
* R-Studio sets now the access rights of the current user to created files.
* Info about multi-pass imaging phases has been added to the log.
* A new option Check sectors status has been added to the Recheck Recovery Chances dialog box.
The Technician version
* Post Actions (Shut down the computer on task completion & E-mail options) have been added to the Options window.
Changes:
= The default system info file names have been changed to R-Studio-SystemInfo-yyyy-MM-dd.
= The I/O Options button has been renamed to the Options button.
= The Forensic Log Settings dialog box has been moved to the Forensic Log Settings tab on the Recover dialog box.
Bugfixes:
- It was impossible to register R-Studio and R-Studio Technician simultaneously on the same computer. Fixed.
- It was impossible to disable all additional phases for multi-pass imaging in order to enable only the main one. Fixed.
- R-Studio performed Slow areas and Retrying phases of multi-pass imaging even when when they were disabled. Fixed.
- The Map of file command was active in the left pane of the Content panel. Fixed.
- R-Studio threw a Corrupt data error message for ddrescue map files larger than 64kB. Fixed.
- It was impossible to perform sector map operations for incomplete images. Fixed.
- Not all info was copied from the Get Info window. Fixed.
- Missing disks added to Virtual Volume Set or Virtual Mirror couldn't be edit correctly. Fixed.
- Some partition and drive actions could be performed during disk operations like disk scan, RAID consistency check, and so on. Fixed.
- No progress bar was shown during manual update. Fixed.
- R-Studio may have frozen while executing the Recover All Files command. Fixed.
- File sorting may have changed to default (Real file system) when the Show Files command was executed for an already opened tab, or the tab was moved, etc. Fixed.
- Child objects of a wiped drive/partition were not automatically deleted from the Device view pane. Fixed.
- The Close All command appeared in the Partition tab shortcut menu even only one tab was opened. Fixed.
- Questionable folders may have disappeared in the panels after Rescan Folder. Fixed.
- Not all information could be copied from the Get Info window. Fixed.
- Existing zero-sized files had the green mark for recovery chances. Fixed.
- The Preview command was active in the Find Results panel for zero-sized files. Fixed.
- A negative offset may have been entered into the I/O Monitor field. Fixed.
- An image of a password-protected APFS container could not be opened even with the correct password. Fixed.
- File marking results may have been different for different time format. Fixed.
- The information in the Disk Properties tab was updated incorrectly. Fixed.
- Data on virtual block RAIDs with disks with bad sectors may have read too slowly. Fixed.
- R-Studio crashed when the byte-to-byte imaging was selected in a system with only one disk. Fixed.
- Many cosmetic bugfixes.
Test/hexadecimal editor:
- The Find previous command and reverse search may have executed incorrectly. Fixed.
- The Select From/To procedure didn't work correctly with the Search command.
- The search command may have been executed incorrectly when the Not equal option was enabled. Fixed.
- The Append command may have been executed incorrectly. Fixed.
R-Studio for Linux 5.0.5007 Fri Apr 29, 2022
New Features:
+ Support for the ReFS 3.7 file system (Windows Server 2022).
+ Several file systems (the main and several reformatted ones) can now be found on one partition, if their traces remain in the boot records.
+ Several disk objects can be opened in one tab. All these objects can be simultaneously searched for files, their files can be marked and recovered.
+ Drive imaging can be interrupted and then resumed. When the user stops an imaging process, they have two options: to discard an already created partial image file or to save it to resume drive imaging later. Created partial images can be loaded, too.
+ Support for the VMDK virtual disk format (open: all version, creation: Technician).
+ Some extended options have been added to the drive operation progress windows. They can be altered on-the-fly.
+ File types can be searched for on the Known File Types dialog box.
R-Studio Technician:
+ A new license type T80+. R-Studio T80+ is equal in its features to full-fledged R-Studio Technician, runs for a certain period of time, and during its validity period can be upgraded to R-Studio Technician for the initial price difference. The license price of 1 USD per day is very affordable for small businesses, computer repair shops, and individual data recovery contractors.
+ R-Studio Technician is now available on our public web pages and can be tested in the Demo mode.
+ Runtime imaging. R-Studio creates drive images in parallel with other drive reading operations. Next time when R-Studio accesses data from imaged drive areas it gets the data from the runtime image.
+ Multi-pass imaging. Images from problematic drives can be created through several phases reading data from good areas first and from bad and slow areas later. Such approach allows for extracting maximum possible amount of data even from quite faulty drives.
+ Support for sector maps, both in the R-Studio's format and in the third-party software ddrescue and HDDSuperClone formats.
+ I/O Monitor allows the user to inspect read/write operations in real time.
A full-featured hexadecimal editor is now available in the Technician/T80+ and Corporate versions.
Improvements:
* The ISO image file type has been added to the File Types list.
* Estimation of recovery chances has been improved.
* When a user opens an already opened partition it brings the user to the corresponding tab.
* Option processing for the Find/Mark dialog box has been improved.
* Execution of the Save All File Names / Load File Names commands has been accelerated.
* File type icons have been added to the Find Results (Find All Files) panel.
* A warning message appears when the user tries to close tabs with open disks/partitions.
* The recovered part of a file will remain when the recovery process has been interrupted.
* Message display in the Log View panels has been improved.
* File System error message codes are expanded for deletion/move errors.
* R-Studio shows now S.M.A.R.T. attributes for NVME SSD devices.
* Detection of S.M.A.R.T. attributes have been improved for new hard drive modes.
* Detection of Disk identity parameters (Vendor name, Product name, Firmware version, Serial number) has been improved.
* Processing of the .Trash folder has been improved for macOS file systems.
* Processing of encrypted APFS partitions has been improved.
* Support for macOS file vault has been improved.
* File system recognition has been improved for scanned APFS file system.
* APFS file systems and APFS Fusion Drives can be recognized on a pure hard drive without protective GPT partitions.
* Support for APFS sealed volumes created by macOS Big Sur and later.
* Symlink processing has been improved, including the Mark all and Unmark all commands.
* Read/write operations have been greatly accelerated for block RAIDs with small block sizes. E.g., the read speed for a 512b block has been increased from 5MB/sec to 100MB/sec.
* Read operations has been accelerated for block RAIDs by paralleling I/O operations for parent disks. E.g.,the read speed for a 3HD RAID5 has been increased from 100MB/sec to 190MB/sec.
Bugfixes:
- R-Studio Technician for Mac/Linux couldn't be re-registered into the T80+ version. Fixed
- Masked marked files were incorrectly counted. Fixed.
- Tabs may have closed without a due warning. Fixed.
- Deleted files were not marked with the red cross in the Find Results pane. Fixed.
- The Recover Marked button may have been inactive after marking files using the Find/Mark dialog box and when the Skip files with bad sectors option is selected on the Recover dialog box. Fixed.
- The Recover Marked shortcut menu item and button remained inactive when a file was marked for recovery in the Find Results pane. Fixed.
- When there was not enough room for a large file and a new destination was assigned, the leftover of the file left in the first place. Fixed.
- Recovery froze and could not be resumed if a file name and path appeared too long. Fixed.
- Recovery froze from the Extensions tab when the Restore folder structure and Restore from root options were selected on the Recovery dialog box. Fixed.
- It was possible to perform many Drag&Drop operations while performing various drive tasks. Fixed.
- The OK button was active when the Password field was empty on the Enter the password dialog box. Fixed.
- An RDR-type image could not be correctly removed from a virtual RAID. Fixed.
- RAID-connected tabs didn't close when the RAID parameters were altered. Fixed.
- A Virtual Block RAID object may have frozen when another RAID parent was added. Fixed.
- When the recover options Restore folder structure and Restore from root were selected, the original Modified and Accessed timestamps were changed to the time of file recovery. Fixed.
- The program may have crashed when connecting to a remote computer. Fixed.
- Symlinked folders remained marked when their target were unmarked. Fixed.
- Files from symlinked folders may have recovered to incorrect places. Fixed.
- The Advanced Scan dialog box may have shown the Scan area parameter incorrectly after second clicks on the Advanced button. Fixed.
- Strings on Properties panel were selected incorrectly. Fixed.
- The Find/Mark dialog box could not show all opened partitions correctly when they were many. Fixed.
- R-Studio showed files in renamed folders as deleted, although they were not. Fixed.
- R-Studio may freeze when opening a RAID created from disk images. Fixed.
- The Logical Sector Size parameters may have appeared twice on the IDE Properties tab. Fixed.
- R-Studio may have frozen when creating an image of a recognized partition. Fixed.
- Files didn't appear in the Find Results panel after they were unmasked if file sorting tabs were switched.
- R-Studio may not have found a file by its exact size. Fixed.
- FAT cross-linked folders may have been processed incorrectly. Fixed.
- Zero-sized files could be viewed in the built-in Text/Hexadecimal Editor and file previewer. Fixed.
- The FAT32 bitlocker to go couldn't be recognized. Fixed.
- An image file from a remote computer could not be saved to either the remote computer or local one. Fixed.
- S.M.A.R.T. for Intel NVME devices may have been displayed incorrectly. Fixed.
- The rdr image for an APFS container couldn't be parsed automatically and required refreshing. Fixed.
- R-Studio may have crashed while enumerating files on APFS file systems. Fixed.
- Metadata FS snapshot for a recognized APFS file system could not be saved. Fixed.
- An empty string appeared in the Drive type field in the Properties tab for an APFS volume. Fixed. R-Studio shows the "APFS Volume" string now.
- An image could not be created for a drive on a remote computer connected using R-Studio Agent. Fixed.
- The program may have gone into a loop and frozen at the last stage of partition recognition. Fixed.
- The program may sometimes have frozen when recognizing the file system. Fixed.
- When a partition without a file system on a MBR disk was formatted, the partition divided into a not-equal volume and partition. The were shown as two different objects. Fixed.
- When R-Studio found a direct volume on a flash drive, it didn't search for deleted partitions. Fixed.
- Sometimes R-Studio may have assembled non-conventional APFS Fusion drives incorrectly. Fixed.
- Many cosmetic, wrong messages, and localization bugs have been fixed.
Technician version:
- Objects could not be opened in the Hexadecimal editor from DDI drive map files. Fixed.
Text/hexadecimal editor:
- An unnecessary inquiry about overwriting a file after executing the Tools - Save to Binary File... or Save to Hexadecimal file command may have appeared. Fixed.
R-Studio for Linux: version history
Re: R-Studio for Linux: version history Part II
R-Studio for Linux 4.10.4043 Thu Dec 24, 2020
New features:
+ Fast search for lost partitions has been added.
+ Symbolic links may be hidden on the File Mask dialog box.
+ Symbolic links may be hidden by default on the Settings panel in the Technician version.
+ Folders, which are symbolic links to other folders (targets), can be shown as links, without showing the content of the targets. (Technician version)
+ Support for deduplication in the NTFS file system created by Windows Server 2019 has been added.
+ Support for the ReFS file system created by Windows Server 2019, including deduplication, has been added.
+ Support for the ISO9660 file system used in CDs/DVDs/ISO images has been added.
+ Support for the UStar/Tar/CPIO/Pax file systems used in tape storage devices has been added (Technician version).
+ R-Studio Emergency can now run in 64-bit mode and use all available RAM to recover large hard drives.
Improvements:
* Extended control over file preview has been added. Files can now be marked for recovery, recovered, etc., directly from the built-in File previewer.
* An option to recover only marked files matching the applied file mask or all marked files has been added to the Recover dialog box.
* Extended control and display of scanned and unscanned disk areas has been added.
* A special mark has been added for a folder with marked files that are hidden by the applied mask.
* The algorithm that estimates chances for successful file recovery has been improved.
* Recognition of NTFS file systems with some wiped parts has been improved.
* Recognition of fat16/32 folders with small numbers (1-2) of files has been improved.
* Recognition of ext2/3/4 partitions with block sizes <=1024 bytes has been improved.
* Folder links comparison has been added for recognized ext2/3/4 file systems to improve the recognition of very small file systems (1 group/cylinder block) and the quality of recognized partitions.
* The program now recognizes an APFS partition with an erased main files B-Tree.
* Icons have been redesigned for better resizing on HiDPI screens.
* Interface localizations have been improved.
Bugfixes:
- R-Studio parsed only the GPT partition table, even when it was invalid, when both LDM/MBR and LDM/GPT were present on the disk. Fixed.
- The Recover marked command was inactive if marked files were invisible due to the applied file mask. Fixed.
- The Copy information command copied the information from the previous file when the information of the selected file didn't exist. Fixed.
- The Expand All command for the folder tree may have frozen on partitions with large numbers of folders. Fixed.
- The number of marked files may have been displayed incorrectly when the view was changed from Real, by Extension, by Time, etc. Fixed.
- Sometimes R-Studio may have crashed during file recovery. Fixed.
- Sometimes the built-in previewer may have frozen when showing damaged files. Fixed.
- Scan time and progress may have been displayed incorrectly while scanning several regions. Fixed.
- Disk scan may have crashed or frozen during the process and an attempt to stop it. Fixed.
- The Rescan the entire disk command may have failed for an already scanned disk. Fixed.
- The Scan dialog didn't size units when it was closed and then opened again. Fixed.
A lot of symlink processing bugs have been fixed, two being worst:
- If there was a symlink to another folder in a place to store recovered files, and there was a folder in the data for recovery which name coincided with that symlink's folder, the recovered data was written to the symlink's folder. That may have resulted in complete loss of files stored in the symlink's folder. Fixed. Now R-Studio saves recovered files only within the path(s) specified for storing recovered files.
- When files were marked and then umarked in a folder that was a symlink, the files in its target were unmarked, too. Fixed.
- Disс information wasn't renewed when the CD was ejected and the Refresh command was executed. Fixed.
- R-Studio tried to access an attached CD/DVD drive during device refresh which may have resulted in temporal freeze. Fixed. Now R-Studio accesses a CD/DVD drive only when it works with it. Fixed.
- Disk size wasn't shown for a CD/DVD disc under WIndows NT. Fixed.
- R-Studio may have temporally frozen while switching between the Real, Extension, XXX Time views for partitions with many folders. Fixed.
- R-Studio treated folders with files hidden by an applied mask as empty folders and didn't show them when the Hide empty folders option is selected. Fixed.
- Empty folders may have been incorrectly recovered. Fixed.
- Mark/unmark records from file recovery lists were applied only to files visible after a file mask was applied. Fixed. Now the user is asked to apply the records to all files or only to files visible after a file mask was applied.
- R-Studio may have crashed when the Recover All Files command was started. Fixed.
- R-Studio may have frozen when a shortcut menu was invoked for an incremental image without one part. Fixed.
- The program may have frozen during the opening or scan of some images. Fixed.
- The warning that a mask was applied my have not shown on tab titles. Fixed.
- NTFS file systems with the cluster size of 64k may have been processed incorrectly. Fixed.
- Scan info for objects found during the fast scan for lost partitions may have been saved/loaded incorrectly (incorrect parent objects). Fixed.
- The colors for file selection and file name font in the folder tree were almost the same on some Linux distros. Fixed.
- Search for files with localized names may have failed if their names and search string had different cases. Fixed.
- Several internal fixes.
- Some cosmetics bugfixes.
- Hexadecimal editor may have frozen while opening a multi-volume image. Fixed.
R-Studio for Linux 4.9.3919 Tue Apr 07, 2020
New features:
+ Deleted partitions can be instantly found, without long scan.
+ Files can be recovered or marked for recovery directly from File previewer.
+ The number of read tries for bad sectors can be changed during a disk
operation.
Improvements:
* FAT folders partially damaged within sectors are also enumerated.
Bugfixes:
- No messages appeared in the log when a scan process was interrupted. Fixed.
- When R-Studio for Mac accessed data inside an already opened part of a multi-part image, a request to open this part may have appeared. Fixed.
- A multi-part image may have been opened incorrectly if the parts were small. Fixed.
- Log information may have been incorrect when recovery was interrupted. Fixed.
- When opening the next in turn part of a multi-part image, it was possible to click the OK button without entering the required file name. The part was lost and no more inquires were issued. Fixed.
- Sometimes the program may have sent a wrong message about not enough space when the image was written to alternative paths. Fixed.
- The Advanced Scan dialog box may have been shown incorrectly. Fixed.
- R-Studio for Mac may have frozen or crashed while opening file systems. Fixed.
- The best copy of the FAT table for FAT12/16 file systems was determined incorrectly when it was determined sector-wise. Fixed.
- The path dialog box on the remote computer may have delayed for a long time if there were unaccessible connected network drives. Fixed.
- R-Studio for Mac may have found waste copies of GPT partitions if a GPT disk was reformatted to an LDM/MBR disk. Fixed.
- The program may have found some garbage GPT partition entries when those entries were re-written. Fixed. Now R-Studio for Mac checks their validity and cancels invalid records.
- Partitions could not be copied to an HDD with several partition tables (i.g., a GPT table and some deleted ones). Fixed.
- An extended debug file system snapshot could not be saved for disks with unsupported encryption methods. Fixed.
- Several small internal and cosmetic bugs have been fixed.
Text/hexadecimal editor:
- The offset field in the GoTo dialog box may have been shown incorrectly. Fixed.
- Strings may have been truncated on the Find Results panel. Fixed.
R-Studio for Linux 4.8.3871 Wed Dec 25, 2019
New features:
+ Support for the compression algorithms lzvn and lzfse has been added. They are used in the new HFS+/APFS versions.
Bugfixes:
- R-Studio may have crashed when creating an ext4 FS metadata image. Or it may have created it slowly. Fixed.
- R-Studio may sometimes have crashed when opening heavily corrupted file systems. Fixed.
R-Studio for Linux 4.8.3853 Sat Nov 23, 2019
Bugfixes:
- The program may have crashed while analyzing damaged Ext4FS file systems. Fixed.
- Sometimes program didn't switch to new alternative paths when it ran out of free space on the selected device. Fixed.
- Data in the Find All in the Text/Hexadecimal editor wasn't fully shown until the mouse was dragged over them. Sometimes the panel may have frozen. Fixed.
R-Studio for Linux 4.8.3819 Sat Nov 09, 2019
New Features:
+ Support the APFS file system created by macOS Catalina has been added.
+ Support of the APFS Fusion Drive has been added.
+ Several paths can be immediately specified for multiple-volume images.
+ Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices.
Technician version:
+ Alternative paths can be specified for places to store recovered files and images.
+ Post Action options have been added for unattended operations:
. Automatic shutdown once lengthy operations have completed: file recovery, disk scan, and disk imaging. When this option is specified, R-Studio checks that all relevant information (scan info, RAID layouts, etc) has been saved and advanced recovery features specified.
. Automatic email notification regarding operation success/failure.
Improvements:
* Objects of the /snap/XXX type are not shown on the Drive panel.
* Search for deleted files has been improved for the Ext2/3/4 and UFS1/UFS2 file systems.
* File system reconstruction has been improved for APFS partitions.
* The Open folder when done option has been added to the Recover dialog box.
* File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions.
* Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions.
* Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal.
* Network data recovery speed has been increased by several dozen times.
* Text/hexadecimal editor shows the position on partition for resident files on the Ext4, UFS, HFS+, and APFS file systems, and for compressed files on the HFS+ file systems.
Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time. Fixed.
- R-Studio may have crashed during performing recheck recovery chances. Fixed.
- Volume labels may have been detected incorrectly for UFS1 partitions. Fixed.
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted. Fixed.
- When an invalid RAID table was applied, the program didn't throw a warning. Fixed.
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4. Fixed.
- The cursor may have moved incorrectly when editing the RAID table. Fixed.
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly. Fixed.
- Sometimes, R-Studio may have selected an incorrect folder for cross-linked files on FAT file systems. Fixed.
R-Studio for Linux 4.7.3481 Tue May 21, 2019
New features:
+ Get Info panel has been added to the Content pane. Detailed information about a selected file. Extended file information in the Technician version like disk regions, overlapping files, etc.
+ Advanced options have been added to file recovery lists in the Technician version: specific file system info, overlapping files, disk regions, etc.
Improvements:
* Files in Extra Found Files (raw files) can now be automatically excluded from recovery if they are duplicates of files found in the real file system.
* Support for NTFS cluster sizes from 128KB to 2MB has been added.
* The algorithm for estimation of file recovery probability has been improved.
* Memory usage has been optimized and debugged.
* The Reset button has been added to the RAID Parents tab. It resets RAID parameters to those set by the Apply button.
* LVM processing has been improved.
Bug-fixes:
- R-Studio may have temporally frozen when opening an NTFS partition with many compressed files. Fixed.
- R-Studio may have opened APFS partitions with many files for a long time. Fixed.
- The Find Previous Version of the File command may have worked incorrectly. Fixed.
- Mask presets may have loaded incorrectly. Fixed.
- Date may have changed incorrectly in the File Mask dialog box. Fixed.
- Multiple files that occupy the same sector may have been shown incorrectly in Text/hexadecimal editor. Fixed.
- If files were manually unmarked, they could not be marked for recovery using the File/Mark dialog box. Fixed.
- Existing files may have been shown as deleted in cross-linked folders on FAT32 partitions. Fixed.
- Some file dates may have been saved to File Mask presets incorrectly. Fixed.
- R-Studio may have crashed when opening disk images. Fixed.
- The Show Files command in Text/hexadecimal editor may have stopped working if file region enumeration was interrupted by the user. Fixed.
- The Details/Icons view may have switched incorrectly when switching opened partitions. Fixed.
- Units in the Size fields on the Find/Mark dialog box were always reset to Bytes. Fixed.
- R-Studio may have frozen or crashed when the Reopen Drive Files button was quickly clicked several times. Fixed.
- Sometimes mdadm RAIDs could not be automatically assembled from images. Fixed.
- The Apply changes immediately option could be enabled only on the second attempt. Fixed.
- Any changes in fthe Block order table defaulted all other RAID parameters. Fixed.
- R-Studio may have frozen when one LDM disk was disconnected and the Reassemble button was clicked.
- R-Studio may have crashed when Text/Hexadecimal was opened from the Block information window when working with DDI. Fixed.
- Empty sequences were generated in the Sequences window when the Custom RAID type was selected. Those sequences could not be deleted. Fixed.
- The last valid RAID block order table was saved rather than the current invalid table. Fixed.
- The Get Info window showed wrong file info when sorting had been changed. Fixed.
- Clicking an empty space on the Get Info window opened Hexadecimal editor. Fixed.
- Files remained marked when files were recovered with the Do not recover duplicate files from Extra Found Files option enabled. Fixed.
- Not all information on Overlapping files and Regions when saving file names. Fixed.
- The Find/Mark dialog box didn't preserve selections for the Look At Files/Folders option. Fixed.
- A file and folder may have the same ID on the time/extension sorting tabs. Clicking such object may have resulted in jumping to another object with the same ID. For example, to a file with an ID randomly coinciding with the ID of a folder. Fixed.
- Saving file names for marked files didn't save names for files with links in their paths. Only link name was saved without files in the related folder. Fixed.
- Some small interface and cosmetic bugs have been fixed.
R-Studio for Linux 4.6.3377 Tue Jan 29, 2019
New features:
+ Estimation of chances for successful file recovery
+ Recovery of names and paths for files deleted to Recycle Bin and Trash
+ Support for ReFS 3.4 file system
Improvements:
* A complete redesign of the Find/Mark dialog box.
* The parsing and reconstruction of the FAT32 and NTFS file systems has been improved.
* The parsing of scanned APFS partitions has been improved, especially for large APFS file systems, for which the decrease of parsing time may reach several thousand times.
Bug-fixes:
- The program may have crashed while recovering damaged UFS2.
- It was impossible to mark files using the Find/Mark command if those files had been unmarked manually.
- Time stamps on the Define File Mask dialog box may have worked incorrectly. Fixed.
- Time stamps on the presents on the Define File Mask dialog box may have worked incorrectly. Fixed.
- Values in the Size From field on the Find/Mark dialog box was constantly switching to bytes.
- File previewer didn't work on some Linux distros. Fixed.
- The Find Previous Version of the File command may have not worked. Fixed.
- Large ext4 file systems (60+TB) may have been processed incorrectly. Fixed.
- Sometimes the program may have crashed or frozen during file enumeration and disk scan. Fixed.
- The program may have written data to network drives incorrectly. Fixed.
- Sometimes file systems on automatically created virtual RAIDs may have been created incorrectly when the RAID parents were disk images. Fixed.
- Some encrypted APFS disks could not be opened. Fixed.
- No files (recovered, scan info, image) could be save to connected network drives or to any place defined as a UNC path (\\server\share\path). Fixed.
- The View/Edit command status (enable/disable) may have been incorrectly set. Fixed.
- Details/Small/Medium/Large Icons button status wasn't preserved during switching between opened file panels. Fixed.
- Program Uninstall wasn't digitally signed. Fixed.
- The Ignore file mask option was working incorrectly. Fixed.
- Some corrections have been made to various localizations.
- Some cosmetic fixes.
R-Studio for Linux 4.5.3273 Fri Aug 03, 2018
New features:
+ A completely overhauled file previewer which can now show picture tiles and first frames of video files as icons, and supports a large number of video/audio/graphic/document file formats. These files can now be played back without their respective applications installed.
+ Support has been added for S.M.A.R.T. attributes for NVME devices.
Improvements:
* Processing of NTFS $BitMap file has been improved.
* Support has been improved for disks with several previous partition layouts (MBR, GPT, etc.)
* Processing of APFS file systems has been improved.
Bug-fixes:
- The S.M.A.R.T. panel may have disappeared after disk refresh. Fixed.
- File enumeration on huge APFS file systems may have been slow. Fixed.
- Non-resident symlinks may have been parsed incorrectly on NTFS file systems. Fixed.
- The program may have crashed when an advanced mask was used. Fixed.
- The Parents tab may have disappeared when an rdr-compatible image was added to a virtual RAID. Fixed.
- The same text with a different letter case may have been converted to the initial in the Find/Mark dialog box. For example, if the first search was for Alex* and the second one for ALEX*, the latter may have been automatically converted to Alex*. Fixed.
- File mark in a marked folder using the Look in From current folder / Current folder options may have worked incorrectly. Fixed.
- Request to save changes was always thrown in the Edit User's File Types window even when all changes had been canceled. Fixed.
- Mark/Unmark commands may have worked incorrectly for an empty folder selected in the Folders pane. Fixed.
- Several bugs have been fixed for icon display.
- Several cosmetic bugs have been fixed.
R-Studio for Linux 4.4.3122 Thu Jun 14, 2018
New features:
+ Support has been added for APFS (including encryption), a new Apple file system introduced in macOS High Sierra.
Improvements:
* Folder tree reconstruction has been improved for supported file systems.
* User's known file types immediately become marked upon loading.
* Detection of FAT32 disks has been improved.
Bug-fixes:
- When a Reverse RAID had been created for an object and then deleted, the Delete Reverse RAID command remained active for that object, and the Create Reverse RAID command inactive. Fixed.
- Icons of deleted objects may have remained in the Drives panel. Fixed.
- Sometimes the red highlighting of incorrect values may have flashed even when correct values were entered. Fixed.
- The Find Previous button may have remained active when the search reached the last match. When the button was clicked the last match was highlighted again. Fixed. Now the message that the search is over is thrown.
- The Reload User's File Types button on the Setting/Known File Types tab was active even when there was no user's file types loaded. Fixed.
- If the user's known file types were not saved, all known file types may have become unchecked during disk imaging and simultaneous scanning. Fixed.
- R-Studio may have frozen while working with a remote computer. Fixed.
- Help may have stayed open even when the program was closed. Fixed.
- The program may have crashed during disk scan. Fixed.
- The Drive panel may have shown "ghost" logical disks created by Windows. Fixed.
- The file viewer may have frozen while playing a movie file. Fixed.
- Several bugs in the file viewer have been fixed.
- The program may have confused a real multi-parent object (a Windows Storage Space, LVM, etc.) and its image. Fixed.
- RAID6 and mdadm/LVM containers may have been processed incorrectly. Fixed.
- An already unlocked Apple CoreStorage may have been unlocked again. Fixed.
- The RAID Parents panel may have disappeared when an rdr image was added to the RAID. Fixed.
- R-Studio may have crashed when a file mask for a selected file was specified. Fixed.
R-Studio for Linux 4.3.2961 Mon Feb 19, 2018
Bug-fixes
- Technician version may have been unable to start. Fixed.
- R-Studio may have crashed during product update. Fixed.
- R-Studio may have worked incorrectly with unsupported Open SSL versions used to update download.
- Corrections in some localizations.
R-Studio for Linux 4.3.2951 Tue Feb 13, 2018
New features:
+ Support for Windows Storage Spaces created by Windows Fall Creators Update has been added.
+ Components management for various disk and volume managers (LVM, LDM, WSS, AppleRAID, etc.) has been added.
+ Drive auto-refresh can now be enabled/disabled. This feature is useful when a failing drive is connected.
Improvements:
* Processing speed of the NTFS file system has been increased.
* Processing of NTFS $BitMap file has been improved.
* Improved processing of FAT/exFAT partitions.
Bug-fixes:
- Local time zones were not taken into account when comparing file time stamps. Fixed.
- Dependent file types were selected incorrectly. Fixed.
- Files from transacted NTFS systems may have recovered incorrectly. Fixed.
- The Mark command on the Tools menu may have become inactive after manual unmarking. Fixed.
- During program closure removable devices may have been blocked until the process had been finished. Fixed.
- During startup R-Studio requested IDE info from USB disks which resulted in a long delay. Fixed.
- The "Select All" button on the Known File Types tab may have worked incorrectly. Fixed.
- When recovering files from a remote computer, the Recover Marked command recovered not only marked files in their folder, but all files in all folders up to the device root. Fixed.
- Sometimes folder/file tree on the HFS+ file system may have been re-constructed incorrectly. Fixed.
- R-Studio asked the user if the hidden and/or system file attributes should be removed when such files are set to not be shown in the system. Now this question is always asked regardless of those settings.
- Log message filtering worked incorrectly. Fixed.
- Changes in the Advanced section of the Find/Mark dialog box were saved even this section was disabled. Fixed.
- Long text strings might be truncated in the Log pane and some dialog boxes. Fixed.
- The number of files shown in the "Total files searched" field might be incorrect. Fixed.
- Excessive files might be marked in Extra Found Files. Fixed.
- The File Mask dialog box didn't store mask history. Fixed.
- A removed object (a deleted virtual RAID or disconnected USB drive) might remain opened in the Text/hexadecimal editor. Fixed.
- The Text/hexadecimal editor remained opened when R-Studio was closed. Fixed.
- Find/Mark dialog box sored some advanced options, even when they were disabled. Fixed.
- "View/Edit..." command was enabled for virtual folders of file types in the Raw Files section. Fixed.
- Log didn't show the results of the "Mark matched files" and "Unmark matched files" commands. Fixed.
- "Total files searched" values in the Find Results panel were incorrect. Fixed.
- Several cosmetic bugs have been fixed.
R-Studio for Linux 4.2.2901 Sun Jul 30, 2017
Improvements:
* Automatic check for new versions
* Improved preview for video files
* Improved preview for pdf files
Bugfixes
- several internal fixes
R-Studio for Linux 4.2.2876 Fri May 26, 2017
New features:
+ Support for mdadm RAIDs
+ Support for Apple CoreStorage/File Vault/Fusion Drive
+ Automatic recognition of newly connected/disconnected USB devices.
Improvements:
* Improved support for the NTFS log.
Bugfixes
- Sometimes, the program might incorrectly scan and enumerate files on recognized NTFS partitions. Fixed.
- Sometimes, the program might incorrectly create an image of a UFS partition. Fixed.
- A right-click on an object on the Drives panel selected it but the Properties panel remained old. Fixed.
- Selections in the Contents panel were discarded when the main menu was activated. Fixed.
- A region size could be edited incorrectly in the Properties panel. Fixed.
- The Drives tree might expand / collapse spontaneously during various actions. Fixed.
- It was possible to change object properties on the Device Property tab during object scan.
- Sometimes the Apply button didn't change actual parameters on the Settings dialog box. Fixed.
- It was possible to change R-Studio settings during disk scan. Fixed. Now only Log settings can be changed from the Log panel.
- The program could not sometimes start under Ubuntu 14.04 LTS x64. Fixed.
- Sometimes it was impossible to select sectors in the Offset field in Text/hexadecimal editor. Fixed.
- Many small GUI fixes.
R-Studio for Linux 4.1 build 2793 Thu Feb 16, 2017
New features:
+ Support for the ReFS2+ file system (Windows 2016 Server).
+ Support for NTFS deduplication.
+ New extended duplicate file processing options.
Improvements:
* Improved support for the NTFS log.
* Extended recovery log.
* Improved data copying in Hexadecimal editor.
* A file path can be scrolled and copied in the "File already exists" dialog box.
Bugfixes:
- Data copy commands might work incorrectly on the Properties tab. Fixed.
- Time zones were not taken into account when sorting files by time, files might appear in the previous day. Fixed.
- File Signature editor incorrectly interpreted hex values. Fixed.
- Some first messages were missed in the log. Fixed.
- Several fixes in recognized FAT partition processing.
- Several fixes in scanning and processing of recognized NTFS partitions.
- Some fixes in image creation of UFS partitions.
- Internal fixes and improvements.
R-Studio for Linux 4.0 build 2427 Tue Jul 12, 2016
New features:
+ Data recovery speed and results are improved by using a new data analyzing and recovery kernel.
+ Support for processing of the file system journal for HFS+ and Ext3/4fs partitions. That increased a number of successfully found files.
+ Support for processing of the soft updates journal to enhance data recovery from UFS partitions.
+ Support for recovery of extended attributes for HFS+, Ext3/4fs, and UFS file systems. That improves recovery of Mac OSX Time Machine and Linux selinux ACL.
+ Support for recovery of compressed files in HFS+ file system.
+ A symlink recovery options tab is added to the Settings dialog box in the Technician version.
Text/hexadecimal editor:
+ Search for Not equal string is added.
Improvements:
* Memory optimization for large disk scans.
* Faster Open Drive Files operation.
* Improved S.M.A.R.T. information monitoring. Different icons in the Drive View are used to show the overall HDD SMART status.
* Hard links, symbolic links, and their targets are shown using different icons.
* Scrollbars are added to the Scan Information and Parents tab.
* Improved discovery of the folder trees for deleted files on Ext3/4FS and UFS partitions.
* Created / modified / accessed time stamps on the Find/mark and Mask dialog boxes can be set separately.
* 4 digits are used for the Year field on the Find/Mark and Mask dialog boxes.
* A regular region can be turned into an exclusive one.
* An exclusive region can be of any size fitting the disk. Previously it could only be equal to the disk size.
* Some information, including drive names, file paths, names, etc., can be copied from R-Studio panels.
* Debug information can be saved not only in the fss format, but in the rdr format, too. This format includes all file system meta data, but much less in size when a compressed disk image.
* Text/hexadecimal editor: The status bar now shows the cursor offset in the decimal format, too. It can be copied directly from the status bar.
* A new forensic log file is created only when the computer configuration has been changed. The CaseName/Number/Operator info is written to the forensic log for each session.
Changes:
= The Metadata file types are made invisible on the Known File Types dialog boxes. They are data on a disk rather than actual files, and have no effect on the search for known file types.
Bugfixes:
- R-Studio might crash when it tried to open a partition by file extensions or times. Fixed.
- Negative values might appear in input data fields when KB, MB, GB were changed. Fixed.
- A single byte might be pasted incorrectly through the Paste and Load From File commands. Fixed.
- Texts in the status bar might overlap. Fixed.
- Long texts in dialogs might be shown incorrectly. Fixed.
- Known File Types sets in the Settings and Disk Scan dialog boxes might be different. Fixed.
- R-Studio might crash when opening files on a disk. Fixed.
- R-Studio might crash during scan. Fixed.
- Names of several S.M.A.R.T. attributes were corrected.
- Incorrect work of the Select All and Clear All buttons on the Settings -> Known File Type tab. Fixed.
- Incorrect work of the Set as Default and Revert to Default buttons on the Scan -> Known File Type dialog box. Fixed.
- There was no inquiry about creating a new folder when it was specified in the Specify the target folder field. Fixed.
- When a large piece of data was being written to an unlocked disk in the Hexadecimal editor, the Lock Drive message appeared several times. Fixed.
- Selection disappeared when the cursor was moved in the Hexadecimal editor. Fixed.
- Selection in the Hexadecimal editor was not shown when the Select From command was activated. Fixed.
- Select, copy, and paste did not work in the Find dialog box in the Hexadecimal editor. Fixed.
- Some folders might be lost during recovery of symlinked folders. Fixed.
- The hidden attributes message might appear during Extra Found Files recovery when the Restore folder structure and Restore from root options were enabled. Fixed.
- Selected Known File Types could be changed only from the Settings tabs.
- Changes in customer's known file types were not applied immediately. Fixed.
- Region parameters were edited and created incorrectly. Fixed.
- R-Studio might start disk scan even when no file system and no known file types were selected.
Cosmetics
- The overall progress bar was not always be shown during data recovery. Fixed.
- Dialog boxes drop their values when the value changed from KB to GB
RAIDs
- R-Studio might crashed when saving RAID0 and RAID1E description files. Fixed.
- R-Studio might not load customer's RAID description files. Fixed.
- Parity settings might overwrite the number of rows. Fixed.
- Many cosmetic bugs were fixed.
Text/hexadecimal editor:
- Reverse Search From current position might start search from the end of file. Fixed.
- Text display and scrolling might work incorrectly. Fixed.
R-Studio for Linux 3.9.2015 Sat Jan 12, 2016
New features:
+ A new advanced algorithm for recovering exFAT partitions.
+ Support for Windows Storage Spaces created or updated by Windows 10 Threshold 2.
+ Support for unsynchronized Windows software RAIDs.
+ A new advanced algorithm for recovering exFAT partitions.
Improvements:
* RAID layout description files now store actual RAID parents. They can be automatically loaded into the RAID parents from the Drives list.
* The raw file recovery algorithm (search for Known File Types) is greatly improved. The entire file signature database was checked and corrected.
* R-Studio now detects PCI device id's, in addition to USB device id's. It writes them to the system dump.
Changes:
= A new format for RAID layout description files. The old RAID layout description files are still supported.
Bugfixes:
- Sometimes R-Studio could not find exFAT partitions during disk scan. Fixed.
- Custom offsets were selected incorrectly during automatic RAID parameter recognition. Fixed.
- When the Apply button became active after some changes in the RAID layout, it was necessary to click twice the Apply changes immediately option to activate it. Fixed.
- It was impossible to select Custom in the Block order option when a RAID layout type was selected. Fixed.
- An incorrect color code for 0 in RAID consistency check. Fixed.
- Sometimes free memory was displayed incorrectly. Fixed.
- R-Studio might incorrectly interpret compressed images for LDM disks. Fixed.
- Some cosmetic and localization bugfixes.
Build-in editor:
- The editor showed incorrect Windows time, DOS time, and Unix time. Fixed.
- Custom templates could not be loaded. Fixed.
- The editor hanged when trying to write something to Sector 0 in an off-line disk. Fixed.
R-Studio for Linux 3.9.1878 Thu Oct 22, 2015
Improvements:
* The raw file recovery algorithm (search for Known File Types) is seriously improved. The entire file signature database was checked and corrected.
* Improved Windows Storage Spaces processing: if their parents have time-inconsistent databases, the last valid database is selected.
Changes:
= Custom RAID layouts are created now a bit differently.
Bugfixes:
- When the Apply button became active after some changes in the RAID layout, it was necessary to click twice the Apply changes immediately option to activate it. Fixed.
- It was impossible to select Custom in the Block order option when a RAID layout type was selected. Fixed.
Sometimes a search for a file operation might result in a program crash. Fixed.
- File search for recursively interlinked files in Directory Junctions might result in an endless cycle. Fixed.
- The system might run out of memory when a system dump was being created for an image of a large (several TBs) disk with hundreds incremental/differential backups. Fixed.
- Sometimes it was impossible to create a custom RAID layout. Fixed.
- Some RAID description files could be loaded incorrectly. Fixed.
- Large Windows Storage Spaces (dozens of TBs) were processed incorrectly. Fixed.
- While checking RAID consistency, R-Studio showed sectors with 0 as consistent data (green), although it should be white. Fixed.
- Some cosmetic and localization bugfixes.
R-Studio for Linux 3.9.1831 Mon Aug 31, 2015
New features:
+ Improved emergency startup for UEFI computers.
+ An advanced algorithm for raw file recovery (search for file signatures).
+ The Hex editor extension: A file location is shown in a particular disk sector.
+ Support for Directory Junctions and Symbolic Links.
Improvements:
* Support for storage spaces in windows 10 RTM
* Improved support for NTFS $LogFile
* Improved file recovery from FAT32 disks
* The log data can now be appended to an existing file.
* Now R-Studio shows extra files found by their file signature both in the Raw Files folder and in recognized partitions.
* The file recovery algorithm has been optimized.
* When enumerating files on a FAT partition, R-Studio detects deleted files which cannot be correctly located due to corruptions in file systems made by Windows when it deletes a large number of files. In this case R-Studio throws a warning asking the user to scan the disk to locate those files correctly.
* Improved support for BIOS RAID in R-Studio Emergency and R-Studio Agent Emergency
Bugfixes:
- Sometimes R-Studio recovered simlinks as separate folders with the same content. Fixed.
- R-Studio might crash when many images were open one after another. Fixed.
- The Load/Save files list command might not work when files were sorted by extension or time stamps. Fixed.
- Several cosmetic fixes for the Settings dialog box.
- Cosmetic fixes for the S.M.A.R.T. tab.
- Slow recovery of many small files (>10,000). Fixed.
- Directory Junctions weren’t showed correctly under Windows. Fixed.
- The Save File Names to File didn’t work on the extension and time sorting tabs. Fixed.
- After the Load File Names command R-Studio switched to the tab from which the file names were saved. Fixed.
- The Add to RAID menu didn’t have scrolling. Fixed.
- R-Studio might not show the overall data recovery progress. Fixed.
- R-Studio sometimes didn’t show correctly progress for some operations like partition opening, imaging. Fixed.
- When working with DDI, the information in the Status: B/C column might disappear when switching the file sorting tabs (extension, times). Fixed.
- Sometimes R-Studio showed folders deleted from the root folder in Extra Found Files rather than in the root folder. Fixed.
- RAID consistency check once stopped could not be continued. Fixed.
- When recovering Directory Junctions, R-Studio might save files to the Directory Junctions symbolic paths rather than to the recovery path. Fixed.
- The Save File Names command didn’t work from the extension and time stamps tabs. Fixed.
- R-Studio asked to save scaninfo before initial scanning an opened image or loading scan info. Fixed.
- R-Studio attached recognized partitions from an opened dsk disk image to those on the original hard drive. Fixed.
- R-Studio cut text strings in the progress window. Fixed.
- Anytime the Settings were changed R-Studio asked to re-write its log. Fixed.
- The Maximum messages in the Event Log option on the Settings/Log tab didn’t work. Fixed.
- The Apply changes immediately option could be enabled only after the second click after changing parameters on the RAID Parents tab.
Hexadecimal editor:
- The changes buffer might work sloppy for very many changes. Fixed.
- An extra right character was saved to the file when a command Save to Hexadecimal File was performed for a selected area. Fixed.
- The Text/hexadecimal editor sometimes didn’t refresh its status bar. Fixed.
- The cursor might slightly get onto the next character. Fixed.
- Search was conducted over unchanged data if changes in the data had not been saved.
DeepSpar integration:
- When performing the Refresh command on the shortcut menu, R-Studio refreshed the previous DeepSpar disk. Fixed.
- R-Studio didn’t unmark files after the Clone marked file sectors command had been performed for DeepSpar disks. Fixed.
- The Clone file sectors command didn’t work when files were sorted by extension or timestamps. Fixed.
R-Studio for Linux 3.8.1670 Tue Mar 03, 2015
New features:
+ Accelerated disk scan for fast-read devices.
+ Search for deleted file versions. R-Studio for Linux can search for deleted file versions using their sizes, names and extensions, and recognized file types as the search parameters.
Improvements:
* More reliable and significantly faster recognition of NTFS and FAT partitions.
* Files found using both search for known file types and file record analysis are now shown only in the file/folder structure.
* Improved data selection in the Hexadecimal editor. Now the beginning and end of the area to be selected can be set by the Select from and Select to commands in the shortcut menu.
* Appending data to an existing file in the Hexadecimal editor. A file fragment selected in the editor can be appended to an existing file.
* An external file can be loaded to a selected position in the file opened in the Hexadecimal editor.
* The Hexadecimal editor shows the serial number for the parent hard drive when editing a virtual RAID.
* The Hexadecimal editor shows now a search position together with the progress bar.
* A max buffer size control for changes in the Hexadecimal editor is added to the Main tab of R-Studio for Linux Settings.
Bugfixes:
- Sometimes scan might freeze. Fixed.
- When a created virtual object like a region, RAID, image, etc, was deleted, its scan info remained somewhere under the root object Local Computer, and no command can be executed upon that info. Fixed, now R-Studio for Linux asks to save that scan info before deleting the object.
-When a connection to a remote computer was lost, all open tabs (disks or partitions) from that computer remained in R-Studio for Linux. Fixed.
- Incorrect log data for file recovery in the Demo mode: all files were counted as recovered, even they could not recover due to Demo mode restrictions. Fixed.
- Names, Labels, and File Systems were lost for objects in an exclusive region when it was edited. Fixed.
- It was impossible to enter hex values in the offset field in the Hexadecimal editor. Fixed.
- Sometimes data search didn't work in the Hexadecimal editor, and it was impossible to stop it. Fixed.
- Some settings like a path to the user's known file type file were GUI language-dependent. When the language was changed, they got lost, when the language was changed back, they appeared again. Fixed.
- Sometimes “Error creating system snap shot for...” appeared in the log when a FS Snapshot was created. Fixed.
R-Studio for Linux 3.7.1568 Thu Dec 18, 2014
New features:
+ Support for Linux Logical Volume Manager (LVM/LVM2). R-Studio can automatically recognize and assemble its volumes from their components even if RAID parameter records are slightly damaged. Components with severe corrupted RAID parameter records can be added manually.
+ Support for Windows Storage Spaces created by Windows 10. Now R-Studio can process WSS created by Windows 8/8.1 and 10, both with automatic recognition and manual adding their parents.
+ Support for Apple software RAIDs created by the OSX system. R-Studio can automatically recognize and assemble them from their members. Members with severe corrupted RAID parameter records can be added manually.
R-Studio for Linux 3.6.1466 Fri Oct 03, 2014
New features
+ Support for Windows Storage Spaces. R-Studio can automatically recognize and assemble Windows Storage Spaces from their parents even if their databases are slightly damaged. Their parents with severe corrupted storage pool databases can be added manually.
+ Support for DiskSpare Disk Imager (DDI) images and disk maps. R-Studio can read and process images and disk maps created by standalone DDI hardware.
Improvements:
* When recovering data over network, R-Studio now processes virtual block RAIDs, as other objects, on the remote side, avoiding large data transfers over the network.
* R-Studio Demo can recover files up to 256 KB.
* The scanning stop procedure is improved: scan information can be saved before stopping.
Bugfixes:
- Sometimes disks with bad sectors might be copied incorrectly. Fixed.
- Sometimes disk scans might freeze. Fixed.
- The progress bar might disappear while finding RAID parameters. Fixed.
- RAID 6 /Vertical Xor RAIDs parameters might display incorrectly. Fixed.
R-Studio for Linux 3.5.1347 Thu Jul 10, 2014
Improvements:
* Support for high dpi screens.
* R-Studio warns when attempting to connect to an already connected remote computer and blocks such attempt.
Bigfixes:
- Changing values for Virtual Memory on the Settings/Memory panel resulted in changes for Physical Memory, and vice versa. Fixed.
- The Memory size parameter was incorrectly manually edited on the Settings/Memory panel. Fixed.
- The Create scan information file option on the Create Image dialog box was enabled by default. Fixed.
- Old parameters remained after a new RAID parameter detection. Fixed.
- Negative values might appear in the Detection Rate during RAID parameter detection. Fixed.
R-Studio for Linux 3.5.1297 Tue Jun 10, 2014
Bugfixes:
1. Sizes of recognized partitions on virtual RAIDs might be shortened. Fixed.
2. R-Studio might show deleted files/folders which MFT records were occupied with new ones on wrong places. Fixed.
3. Sometimes Detection Rate might might show negative values during RAID parameter detection. Fixed.
4. A default Crash Report filename contained an illegal character :. Fixed.
5. R-Studio didn’t take into account folder’s hard links during file search. (It didn’t show files in hard links). Fixed.
R-Studio for Linux 3.5.1236 Thu May 29, 2014
New features:
+ Hardlink recovery for HFS+ and NTFS.
Bugfixes:
- When auto-detecting RAID parameters, R-Studio not always selected the best variant. Fixed.
- Incorrect symbols in the License Agreement. Fixed.
- Incorrect behavior of the Failed hardlink recovery dialog box. Fixed.
- The Create scan information option was selected by default on the Create Image dialog box. Fixed.
- R-Studio failed to create an image when a new folder was selected. Fixed.
- R-Studio might freeze when attempting to open a file of a multi-file image with some other files moved to another place. Fixed.
R-Studio for Linux 3.5.1143 Thu Apr 10, 2014
New features:
+ Reverse RAIDS: This technique enables the user to decompose a real disk object into a virtual RAID. Then those components of that reverse RAID can be processed like real objects. They can be viewed, edited, imaged, copied to physical drives, etc. This technique also can re-construct data on the real parents of a virtual RAID, on a missing disk, for example.
+ S.M.A.R.T. attribute monitoring. R-Studio can display S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) attributes for hard drives to show their hardware health and predict their possible failures. Any unnecessary work with such hard drives should be avoided if S.M.A.R.T. warnings appear.
+ New GUI languages added: Traditional and Simplified Chinese, Japanese, and Portuguese.
Improvements:
* Known File Type parsing is improved.
* Support for HFS+ folder hardlinks.
Bugfixes:
- R-Studio might freeze when analyzing file systems with cyclic cross-links. Fixed.
- R-Studio didn’t deliver any messages when it didn’t find any offset while detecting RAID parameters. Fixed.
- R-Studio didn’t send block size of a detected RAID to the RAID parents window. Fixed.
- R-Studio didn’t warn its user that is was going to overwrite an existing scan info or image file. Fixed.
- The Hexadecimal editor might freeze after an I/O error. Fixed.
- A Check RAID consistency process could not be resumed after a stop unless the RAID was re-created. Fixed.
- It was possible to connect a single remote computer any times, and the same numbers of that remote computer would appear in the Drives panel. Fixed.
- Many cosmetic bugs.
R-Studio for Linux 3.0.798 Thu Oct 31, 2013
New features:
+ Automatic RAID parameter recognition. R-Studio can recognize all RAID parameters for RAID 5 and 6. This feature helps the user to solve one of the most difficult problems in RAID recovery - RAID parameter recognition.
+ Support for parity delays in all applicable RAID layouts.
Improvements:
* Enhanced parity delay controls.
Bugfixes:
- Several connections from the same remote computer were possible. Fixed.
- R-Studio didn’t warn about losing informaiton on a virtual RAID upon its closure. Fixed.
- No warning was displayed about an attempt to re-write existing scan info during simultaneous disk scan and image creation. Fixed.
- The RAID sequences window dissapered. Fixed.
- Several cosmetic bugfixes.
R-Studio for Linux 2.1.476 Jun 14, 2013
New features:
+ Support for RAID5 with parity delays often used in HP servers.
+ Support for new RAID levels: RAID10 (1+0), RAID1E, RAID5E, RAID5EE, RAID6E.
+ A new file previewer that supports additional file formats: Adobe Acrobat pdf, Microsoft Office documents doc, xls, ppt (Office 97-2003), docx, xlsx, pptx.
+ Support for ReFS (Resilient File System), a new local file system Microsoft introduced in its Windows 2012 Server.
Improvements:
* Almost all R-Studio's files (images, scan info, logs, etc.) can be saved to and load from, a remote computer.
* R-Studio stores the name and path to the file stored on the remote computer.
* When a file name is stored, R-Studio inserts the line end marks depending on the OS.
* When a file name is specified for RAID layout presets, it's automatically added to the settings.
Bugfixes:
- R-Studio might incorrectly recover non-Latin characters in file / folder names (changed to spaces). Fixed.
- R-Studio might crash when connection to a remote computer was stopped. Fixed.
- R-Studio might crash when some RAID parameters were changed on the Parents tab. Fixed.
- A strange symbol might appear in a RAID table. Fixed.
- R-Studio might crash when the RAID consistency check window was closed. Fixed.
- R-Studo Agent for Linux couldn't connect to R-Studio. Fixed.
- R-Studio might crash after scanning a remote computer and saving scan info. Fixed.
- R-Studio didn't ask for a RAID layout preset file name and didn't save it. Fixed.
- R-Studio might crash when a file type description is removed from File Type Editor. Fixed.
- R-Studio might show incorrect info about file sizes and number of folders. Fixed.
- R-Studio might show incorrect number of marked files and their sizes. Fixed.
- R-Studio might perform file find/mark incorrectly. Fixed.
- Sometimes R-Studio might save recovered files to its local folder.
- File Previewer didn’t show non-Latin characters in file names. Fixed.
- The Do you want to remove loaded File Type Definitions right now? message might appear when some settings were changed on the Main tab of the Settings dialog box. Fixed.
- Many cosmetic bugfixes.
R-Studio for Linux 2.0 Build 371 Jun 20, 2012
New features:
+ Simultaneous image creation and scan. Now R-Studio can create an image and simultaneously scan the data being copied. In this case R-Studio creates two files stored at the same place: an image file and file with the scan info.
+ File Recovery Lists: lists of files found on disks that can be exported out of R-Studio, manually edited, than imported back, and files from those lists will be automatically marked for recovery. Such lists are very useful if you want someone who is far away to decide which files are to recover and which aren’t to.
+ RAID consistency check: you may check whether the parity blocks on a RAID are valid.
+ Image and scan info files may be saved on and load from, remote computers. This helps R-Studio to avoid transferring large data volumes over network during network recovery.
Improvements:
* R-Studio processes HFS and FAT file systems much faster.
* R-Studio processes Known File Types much faster.
Bugfixes.
- Sometimes, R-Studio might crash during disk scan. Fixed.
- Some bugs in the Region and Exclusive Region dialog boxes are fixed.
- On the Find/Mark and File Mask dialog boxes, it was possible to enter inconsistent data interval into the between field. Fixed.
R-Studio for Linux 1.0 build 229 Oct 29, 2011
Improvements:
* The GUI language can be changed on-the-fly.
* Explicit specification of any IP address for incoming connections.
* R-Studio now deletes dot and space at the end of the names of recovered files and folders. Windows Explorer and many other programs cannot open such files. They can be opened only if they are opened using their URI (The full path started with //).
Bugfixes
- Some bugs for x64 architecture under modern releases. Fixed.
- Corrections in the French localization.
- Possible crashes during scan and opening of files.
- Search might not work is some parameters are entered into the Find/Mark dialog box. Fixed.
- A bug when the Extension и Description fields were edited in the Edit User's File Types dialog box. Fixed.
- An image file might not be saved on a FAT32 disk if Image split size Fixed on the Create Image dialog box is selected as 4Gb FAT32. Fixed.
- Connect to Remote might not work properly sometimes. Fixed.
- Sometimes R-Studio could freeze while scanning. Fixed.
- Some bugs are fixed in the module loading Known File Types and RAID description files.
- The Wait dialog box could incorrectly show file names during their recovery. Fixed.
- The GUI known file type editor could save several signatures as fffff. Fixed.
- Some small interface bugs.
R-Studio for Linux 1.0.150 Dec 18, 2010
Product launch
New features:
+ Fast search for lost partitions has been added.
+ Symbolic links may be hidden on the File Mask dialog box.
+ Symbolic links may be hidden by default on the Settings panel in the Technician version.
+ Folders, which are symbolic links to other folders (targets), can be shown as links, without showing the content of the targets. (Technician version)
+ Support for deduplication in the NTFS file system created by Windows Server 2019 has been added.
+ Support for the ReFS file system created by Windows Server 2019, including deduplication, has been added.
+ Support for the ISO9660 file system used in CDs/DVDs/ISO images has been added.
+ Support for the UStar/Tar/CPIO/Pax file systems used in tape storage devices has been added (Technician version).
+ R-Studio Emergency can now run in 64-bit mode and use all available RAM to recover large hard drives.
Improvements:
* Extended control over file preview has been added. Files can now be marked for recovery, recovered, etc., directly from the built-in File previewer.
* An option to recover only marked files matching the applied file mask or all marked files has been added to the Recover dialog box.
* Extended control and display of scanned and unscanned disk areas has been added.
* A special mark has been added for a folder with marked files that are hidden by the applied mask.
* The algorithm that estimates chances for successful file recovery has been improved.
* Recognition of NTFS file systems with some wiped parts has been improved.
* Recognition of fat16/32 folders with small numbers (1-2) of files has been improved.
* Recognition of ext2/3/4 partitions with block sizes <=1024 bytes has been improved.
* Folder links comparison has been added for recognized ext2/3/4 file systems to improve the recognition of very small file systems (1 group/cylinder block) and the quality of recognized partitions.
* The program now recognizes an APFS partition with an erased main files B-Tree.
* Icons have been redesigned for better resizing on HiDPI screens.
* Interface localizations have been improved.
Bugfixes:
- R-Studio parsed only the GPT partition table, even when it was invalid, when both LDM/MBR and LDM/GPT were present on the disk. Fixed.
- The Recover marked command was inactive if marked files were invisible due to the applied file mask. Fixed.
- The Copy information command copied the information from the previous file when the information of the selected file didn't exist. Fixed.
- The Expand All command for the folder tree may have frozen on partitions with large numbers of folders. Fixed.
- The number of marked files may have been displayed incorrectly when the view was changed from Real, by Extension, by Time, etc. Fixed.
- Sometimes R-Studio may have crashed during file recovery. Fixed.
- Sometimes the built-in previewer may have frozen when showing damaged files. Fixed.
- Scan time and progress may have been displayed incorrectly while scanning several regions. Fixed.
- Disk scan may have crashed or frozen during the process and an attempt to stop it. Fixed.
- The Rescan the entire disk command may have failed for an already scanned disk. Fixed.
- The Scan dialog didn't size units when it was closed and then opened again. Fixed.
A lot of symlink processing bugs have been fixed, two being worst:
- If there was a symlink to another folder in a place to store recovered files, and there was a folder in the data for recovery which name coincided with that symlink's folder, the recovered data was written to the symlink's folder. That may have resulted in complete loss of files stored in the symlink's folder. Fixed. Now R-Studio saves recovered files only within the path(s) specified for storing recovered files.
- When files were marked and then umarked in a folder that was a symlink, the files in its target were unmarked, too. Fixed.
- Disс information wasn't renewed when the CD was ejected and the Refresh command was executed. Fixed.
- R-Studio tried to access an attached CD/DVD drive during device refresh which may have resulted in temporal freeze. Fixed. Now R-Studio accesses a CD/DVD drive only when it works with it. Fixed.
- Disk size wasn't shown for a CD/DVD disc under WIndows NT. Fixed.
- R-Studio may have temporally frozen while switching between the Real, Extension, XXX Time views for partitions with many folders. Fixed.
- R-Studio treated folders with files hidden by an applied mask as empty folders and didn't show them when the Hide empty folders option is selected. Fixed.
- Empty folders may have been incorrectly recovered. Fixed.
- Mark/unmark records from file recovery lists were applied only to files visible after a file mask was applied. Fixed. Now the user is asked to apply the records to all files or only to files visible after a file mask was applied.
- R-Studio may have crashed when the Recover All Files command was started. Fixed.
- R-Studio may have frozen when a shortcut menu was invoked for an incremental image without one part. Fixed.
- The program may have frozen during the opening or scan of some images. Fixed.
- The warning that a mask was applied my have not shown on tab titles. Fixed.
- NTFS file systems with the cluster size of 64k may have been processed incorrectly. Fixed.
- Scan info for objects found during the fast scan for lost partitions may have been saved/loaded incorrectly (incorrect parent objects). Fixed.
- The colors for file selection and file name font in the folder tree were almost the same on some Linux distros. Fixed.
- Search for files with localized names may have failed if their names and search string had different cases. Fixed.
- Several internal fixes.
- Some cosmetics bugfixes.
- Hexadecimal editor may have frozen while opening a multi-volume image. Fixed.
R-Studio for Linux 4.9.3919 Tue Apr 07, 2020
New features:
+ Deleted partitions can be instantly found, without long scan.
+ Files can be recovered or marked for recovery directly from File previewer.
+ The number of read tries for bad sectors can be changed during a disk
operation.
Improvements:
* FAT folders partially damaged within sectors are also enumerated.
Bugfixes:
- No messages appeared in the log when a scan process was interrupted. Fixed.
- When R-Studio for Mac accessed data inside an already opened part of a multi-part image, a request to open this part may have appeared. Fixed.
- A multi-part image may have been opened incorrectly if the parts were small. Fixed.
- Log information may have been incorrect when recovery was interrupted. Fixed.
- When opening the next in turn part of a multi-part image, it was possible to click the OK button without entering the required file name. The part was lost and no more inquires were issued. Fixed.
- Sometimes the program may have sent a wrong message about not enough space when the image was written to alternative paths. Fixed.
- The Advanced Scan dialog box may have been shown incorrectly. Fixed.
- R-Studio for Mac may have frozen or crashed while opening file systems. Fixed.
- The best copy of the FAT table for FAT12/16 file systems was determined incorrectly when it was determined sector-wise. Fixed.
- The path dialog box on the remote computer may have delayed for a long time if there were unaccessible connected network drives. Fixed.
- R-Studio for Mac may have found waste copies of GPT partitions if a GPT disk was reformatted to an LDM/MBR disk. Fixed.
- The program may have found some garbage GPT partition entries when those entries were re-written. Fixed. Now R-Studio for Mac checks their validity and cancels invalid records.
- Partitions could not be copied to an HDD with several partition tables (i.g., a GPT table and some deleted ones). Fixed.
- An extended debug file system snapshot could not be saved for disks with unsupported encryption methods. Fixed.
- Several small internal and cosmetic bugs have been fixed.
Text/hexadecimal editor:
- The offset field in the GoTo dialog box may have been shown incorrectly. Fixed.
- Strings may have been truncated on the Find Results panel. Fixed.
R-Studio for Linux 4.8.3871 Wed Dec 25, 2019
New features:
+ Support for the compression algorithms lzvn and lzfse has been added. They are used in the new HFS+/APFS versions.
Bugfixes:
- R-Studio may have crashed when creating an ext4 FS metadata image. Or it may have created it slowly. Fixed.
- R-Studio may sometimes have crashed when opening heavily corrupted file systems. Fixed.
R-Studio for Linux 4.8.3853 Sat Nov 23, 2019
Bugfixes:
- The program may have crashed while analyzing damaged Ext4FS file systems. Fixed.
- Sometimes program didn't switch to new alternative paths when it ran out of free space on the selected device. Fixed.
- Data in the Find All in the Text/Hexadecimal editor wasn't fully shown until the mouse was dragged over them. Sometimes the panel may have frozen. Fixed.
R-Studio for Linux 4.8.3819 Sat Nov 09, 2019
New Features:
+ Support the APFS file system created by macOS Catalina has been added.
+ Support of the APFS Fusion Drive has been added.
+ Several paths can be immediately specified for multiple-volume images.
+ Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices.
Technician version:
+ Alternative paths can be specified for places to store recovered files and images.
+ Post Action options have been added for unattended operations:
. Automatic shutdown once lengthy operations have completed: file recovery, disk scan, and disk imaging. When this option is specified, R-Studio checks that all relevant information (scan info, RAID layouts, etc) has been saved and advanced recovery features specified.
. Automatic email notification regarding operation success/failure.
Improvements:
* Objects of the /snap/XXX type are not shown on the Drive panel.
* Search for deleted files has been improved for the Ext2/3/4 and UFS1/UFS2 file systems.
* File system reconstruction has been improved for APFS partitions.
* The Open folder when done option has been added to the Recover dialog box.
* File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions.
* Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions.
* Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal.
* Network data recovery speed has been increased by several dozen times.
* Text/hexadecimal editor shows the position on partition for resident files on the Ext4, UFS, HFS+, and APFS file systems, and for compressed files on the HFS+ file systems.
Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time. Fixed.
- R-Studio may have crashed during performing recheck recovery chances. Fixed.
- Volume labels may have been detected incorrectly for UFS1 partitions. Fixed.
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted. Fixed.
- When an invalid RAID table was applied, the program didn't throw a warning. Fixed.
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4. Fixed.
- The cursor may have moved incorrectly when editing the RAID table. Fixed.
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly. Fixed.
- Sometimes, R-Studio may have selected an incorrect folder for cross-linked files on FAT file systems. Fixed.
R-Studio for Linux 4.7.3481 Tue May 21, 2019
New features:
+ Get Info panel has been added to the Content pane. Detailed information about a selected file. Extended file information in the Technician version like disk regions, overlapping files, etc.
+ Advanced options have been added to file recovery lists in the Technician version: specific file system info, overlapping files, disk regions, etc.
Improvements:
* Files in Extra Found Files (raw files) can now be automatically excluded from recovery if they are duplicates of files found in the real file system.
* Support for NTFS cluster sizes from 128KB to 2MB has been added.
* The algorithm for estimation of file recovery probability has been improved.
* Memory usage has been optimized and debugged.
* The Reset button has been added to the RAID Parents tab. It resets RAID parameters to those set by the Apply button.
* LVM processing has been improved.
Bug-fixes:
- R-Studio may have temporally frozen when opening an NTFS partition with many compressed files. Fixed.
- R-Studio may have opened APFS partitions with many files for a long time. Fixed.
- The Find Previous Version of the File command may have worked incorrectly. Fixed.
- Mask presets may have loaded incorrectly. Fixed.
- Date may have changed incorrectly in the File Mask dialog box. Fixed.
- Multiple files that occupy the same sector may have been shown incorrectly in Text/hexadecimal editor. Fixed.
- If files were manually unmarked, they could not be marked for recovery using the File/Mark dialog box. Fixed.
- Existing files may have been shown as deleted in cross-linked folders on FAT32 partitions. Fixed.
- Some file dates may have been saved to File Mask presets incorrectly. Fixed.
- R-Studio may have crashed when opening disk images. Fixed.
- The Show Files command in Text/hexadecimal editor may have stopped working if file region enumeration was interrupted by the user. Fixed.
- The Details/Icons view may have switched incorrectly when switching opened partitions. Fixed.
- Units in the Size fields on the Find/Mark dialog box were always reset to Bytes. Fixed.
- R-Studio may have frozen or crashed when the Reopen Drive Files button was quickly clicked several times. Fixed.
- Sometimes mdadm RAIDs could not be automatically assembled from images. Fixed.
- The Apply changes immediately option could be enabled only on the second attempt. Fixed.
- Any changes in fthe Block order table defaulted all other RAID parameters. Fixed.
- R-Studio may have frozen when one LDM disk was disconnected and the Reassemble button was clicked.
- R-Studio may have crashed when Text/Hexadecimal was opened from the Block information window when working with DDI. Fixed.
- Empty sequences were generated in the Sequences window when the Custom RAID type was selected. Those sequences could not be deleted. Fixed.
- The last valid RAID block order table was saved rather than the current invalid table. Fixed.
- The Get Info window showed wrong file info when sorting had been changed. Fixed.
- Clicking an empty space on the Get Info window opened Hexadecimal editor. Fixed.
- Files remained marked when files were recovered with the Do not recover duplicate files from Extra Found Files option enabled. Fixed.
- Not all information on Overlapping files and Regions when saving file names. Fixed.
- The Find/Mark dialog box didn't preserve selections for the Look At Files/Folders option. Fixed.
- A file and folder may have the same ID on the time/extension sorting tabs. Clicking such object may have resulted in jumping to another object with the same ID. For example, to a file with an ID randomly coinciding with the ID of a folder. Fixed.
- Saving file names for marked files didn't save names for files with links in their paths. Only link name was saved without files in the related folder. Fixed.
- Some small interface and cosmetic bugs have been fixed.
R-Studio for Linux 4.6.3377 Tue Jan 29, 2019
New features:
+ Estimation of chances for successful file recovery
+ Recovery of names and paths for files deleted to Recycle Bin and Trash
+ Support for ReFS 3.4 file system
Improvements:
* A complete redesign of the Find/Mark dialog box.
* The parsing and reconstruction of the FAT32 and NTFS file systems has been improved.
* The parsing of scanned APFS partitions has been improved, especially for large APFS file systems, for which the decrease of parsing time may reach several thousand times.
Bug-fixes:
- The program may have crashed while recovering damaged UFS2.
- It was impossible to mark files using the Find/Mark command if those files had been unmarked manually.
- Time stamps on the Define File Mask dialog box may have worked incorrectly. Fixed.
- Time stamps on the presents on the Define File Mask dialog box may have worked incorrectly. Fixed.
- Values in the Size From field on the Find/Mark dialog box was constantly switching to bytes.
- File previewer didn't work on some Linux distros. Fixed.
- The Find Previous Version of the File command may have not worked. Fixed.
- Large ext4 file systems (60+TB) may have been processed incorrectly. Fixed.
- Sometimes the program may have crashed or frozen during file enumeration and disk scan. Fixed.
- The program may have written data to network drives incorrectly. Fixed.
- Sometimes file systems on automatically created virtual RAIDs may have been created incorrectly when the RAID parents were disk images. Fixed.
- Some encrypted APFS disks could not be opened. Fixed.
- No files (recovered, scan info, image) could be save to connected network drives or to any place defined as a UNC path (\\server\share\path). Fixed.
- The View/Edit command status (enable/disable) may have been incorrectly set. Fixed.
- Details/Small/Medium/Large Icons button status wasn't preserved during switching between opened file panels. Fixed.
- Program Uninstall wasn't digitally signed. Fixed.
- The Ignore file mask option was working incorrectly. Fixed.
- Some corrections have been made to various localizations.
- Some cosmetic fixes.
R-Studio for Linux 4.5.3273 Fri Aug 03, 2018
New features:
+ A completely overhauled file previewer which can now show picture tiles and first frames of video files as icons, and supports a large number of video/audio/graphic/document file formats. These files can now be played back without their respective applications installed.
+ Support has been added for S.M.A.R.T. attributes for NVME devices.
Improvements:
* Processing of NTFS $BitMap file has been improved.
* Support has been improved for disks with several previous partition layouts (MBR, GPT, etc.)
* Processing of APFS file systems has been improved.
Bug-fixes:
- The S.M.A.R.T. panel may have disappeared after disk refresh. Fixed.
- File enumeration on huge APFS file systems may have been slow. Fixed.
- Non-resident symlinks may have been parsed incorrectly on NTFS file systems. Fixed.
- The program may have crashed when an advanced mask was used. Fixed.
- The Parents tab may have disappeared when an rdr-compatible image was added to a virtual RAID. Fixed.
- The same text with a different letter case may have been converted to the initial in the Find/Mark dialog box. For example, if the first search was for Alex* and the second one for ALEX*, the latter may have been automatically converted to Alex*. Fixed.
- File mark in a marked folder using the Look in From current folder / Current folder options may have worked incorrectly. Fixed.
- Request to save changes was always thrown in the Edit User's File Types window even when all changes had been canceled. Fixed.
- Mark/Unmark commands may have worked incorrectly for an empty folder selected in the Folders pane. Fixed.
- Several bugs have been fixed for icon display.
- Several cosmetic bugs have been fixed.
R-Studio for Linux 4.4.3122 Thu Jun 14, 2018
New features:
+ Support has been added for APFS (including encryption), a new Apple file system introduced in macOS High Sierra.
Improvements:
* Folder tree reconstruction has been improved for supported file systems.
* User's known file types immediately become marked upon loading.
* Detection of FAT32 disks has been improved.
Bug-fixes:
- When a Reverse RAID had been created for an object and then deleted, the Delete Reverse RAID command remained active for that object, and the Create Reverse RAID command inactive. Fixed.
- Icons of deleted objects may have remained in the Drives panel. Fixed.
- Sometimes the red highlighting of incorrect values may have flashed even when correct values were entered. Fixed.
- The Find Previous button may have remained active when the search reached the last match. When the button was clicked the last match was highlighted again. Fixed. Now the message that the search is over is thrown.
- The Reload User's File Types button on the Setting/Known File Types tab was active even when there was no user's file types loaded. Fixed.
- If the user's known file types were not saved, all known file types may have become unchecked during disk imaging and simultaneous scanning. Fixed.
- R-Studio may have frozen while working with a remote computer. Fixed.
- Help may have stayed open even when the program was closed. Fixed.
- The program may have crashed during disk scan. Fixed.
- The Drive panel may have shown "ghost" logical disks created by Windows. Fixed.
- The file viewer may have frozen while playing a movie file. Fixed.
- Several bugs in the file viewer have been fixed.
- The program may have confused a real multi-parent object (a Windows Storage Space, LVM, etc.) and its image. Fixed.
- RAID6 and mdadm/LVM containers may have been processed incorrectly. Fixed.
- An already unlocked Apple CoreStorage may have been unlocked again. Fixed.
- The RAID Parents panel may have disappeared when an rdr image was added to the RAID. Fixed.
- R-Studio may have crashed when a file mask for a selected file was specified. Fixed.
R-Studio for Linux 4.3.2961 Mon Feb 19, 2018
Bug-fixes
- Technician version may have been unable to start. Fixed.
- R-Studio may have crashed during product update. Fixed.
- R-Studio may have worked incorrectly with unsupported Open SSL versions used to update download.
- Corrections in some localizations.
R-Studio for Linux 4.3.2951 Tue Feb 13, 2018
New features:
+ Support for Windows Storage Spaces created by Windows Fall Creators Update has been added.
+ Components management for various disk and volume managers (LVM, LDM, WSS, AppleRAID, etc.) has been added.
+ Drive auto-refresh can now be enabled/disabled. This feature is useful when a failing drive is connected.
Improvements:
* Processing speed of the NTFS file system has been increased.
* Processing of NTFS $BitMap file has been improved.
* Improved processing of FAT/exFAT partitions.
Bug-fixes:
- Local time zones were not taken into account when comparing file time stamps. Fixed.
- Dependent file types were selected incorrectly. Fixed.
- Files from transacted NTFS systems may have recovered incorrectly. Fixed.
- The Mark command on the Tools menu may have become inactive after manual unmarking. Fixed.
- During program closure removable devices may have been blocked until the process had been finished. Fixed.
- During startup R-Studio requested IDE info from USB disks which resulted in a long delay. Fixed.
- The "Select All" button on the Known File Types tab may have worked incorrectly. Fixed.
- When recovering files from a remote computer, the Recover Marked command recovered not only marked files in their folder, but all files in all folders up to the device root. Fixed.
- Sometimes folder/file tree on the HFS+ file system may have been re-constructed incorrectly. Fixed.
- R-Studio asked the user if the hidden and/or system file attributes should be removed when such files are set to not be shown in the system. Now this question is always asked regardless of those settings.
- Log message filtering worked incorrectly. Fixed.
- Changes in the Advanced section of the Find/Mark dialog box were saved even this section was disabled. Fixed.
- Long text strings might be truncated in the Log pane and some dialog boxes. Fixed.
- The number of files shown in the "Total files searched" field might be incorrect. Fixed.
- Excessive files might be marked in Extra Found Files. Fixed.
- The File Mask dialog box didn't store mask history. Fixed.
- A removed object (a deleted virtual RAID or disconnected USB drive) might remain opened in the Text/hexadecimal editor. Fixed.
- The Text/hexadecimal editor remained opened when R-Studio was closed. Fixed.
- Find/Mark dialog box sored some advanced options, even when they were disabled. Fixed.
- "View/Edit..." command was enabled for virtual folders of file types in the Raw Files section. Fixed.
- Log didn't show the results of the "Mark matched files" and "Unmark matched files" commands. Fixed.
- "Total files searched" values in the Find Results panel were incorrect. Fixed.
- Several cosmetic bugs have been fixed.
R-Studio for Linux 4.2.2901 Sun Jul 30, 2017
Improvements:
* Automatic check for new versions
* Improved preview for video files
* Improved preview for pdf files
Bugfixes
- several internal fixes
R-Studio for Linux 4.2.2876 Fri May 26, 2017
New features:
+ Support for mdadm RAIDs
+ Support for Apple CoreStorage/File Vault/Fusion Drive
+ Automatic recognition of newly connected/disconnected USB devices.
Improvements:
* Improved support for the NTFS log.
Bugfixes
- Sometimes, the program might incorrectly scan and enumerate files on recognized NTFS partitions. Fixed.
- Sometimes, the program might incorrectly create an image of a UFS partition. Fixed.
- A right-click on an object on the Drives panel selected it but the Properties panel remained old. Fixed.
- Selections in the Contents panel were discarded when the main menu was activated. Fixed.
- A region size could be edited incorrectly in the Properties panel. Fixed.
- The Drives tree might expand / collapse spontaneously during various actions. Fixed.
- It was possible to change object properties on the Device Property tab during object scan.
- Sometimes the Apply button didn't change actual parameters on the Settings dialog box. Fixed.
- It was possible to change R-Studio settings during disk scan. Fixed. Now only Log settings can be changed from the Log panel.
- The program could not sometimes start under Ubuntu 14.04 LTS x64. Fixed.
- Sometimes it was impossible to select sectors in the Offset field in Text/hexadecimal editor. Fixed.
- Many small GUI fixes.
R-Studio for Linux 4.1 build 2793 Thu Feb 16, 2017
New features:
+ Support for the ReFS2+ file system (Windows 2016 Server).
+ Support for NTFS deduplication.
+ New extended duplicate file processing options.
Improvements:
* Improved support for the NTFS log.
* Extended recovery log.
* Improved data copying in Hexadecimal editor.
* A file path can be scrolled and copied in the "File already exists" dialog box.
Bugfixes:
- Data copy commands might work incorrectly on the Properties tab. Fixed.
- Time zones were not taken into account when sorting files by time, files might appear in the previous day. Fixed.
- File Signature editor incorrectly interpreted hex values. Fixed.
- Some first messages were missed in the log. Fixed.
- Several fixes in recognized FAT partition processing.
- Several fixes in scanning and processing of recognized NTFS partitions.
- Some fixes in image creation of UFS partitions.
- Internal fixes and improvements.
R-Studio for Linux 4.0 build 2427 Tue Jul 12, 2016
New features:
+ Data recovery speed and results are improved by using a new data analyzing and recovery kernel.
+ Support for processing of the file system journal for HFS+ and Ext3/4fs partitions. That increased a number of successfully found files.
+ Support for processing of the soft updates journal to enhance data recovery from UFS partitions.
+ Support for recovery of extended attributes for HFS+, Ext3/4fs, and UFS file systems. That improves recovery of Mac OSX Time Machine and Linux selinux ACL.
+ Support for recovery of compressed files in HFS+ file system.
+ A symlink recovery options tab is added to the Settings dialog box in the Technician version.
Text/hexadecimal editor:
+ Search for Not equal string is added.
Improvements:
* Memory optimization for large disk scans.
* Faster Open Drive Files operation.
* Improved S.M.A.R.T. information monitoring. Different icons in the Drive View are used to show the overall HDD SMART status.
* Hard links, symbolic links, and their targets are shown using different icons.
* Scrollbars are added to the Scan Information and Parents tab.
* Improved discovery of the folder trees for deleted files on Ext3/4FS and UFS partitions.
* Created / modified / accessed time stamps on the Find/mark and Mask dialog boxes can be set separately.
* 4 digits are used for the Year field on the Find/Mark and Mask dialog boxes.
* A regular region can be turned into an exclusive one.
* An exclusive region can be of any size fitting the disk. Previously it could only be equal to the disk size.
* Some information, including drive names, file paths, names, etc., can be copied from R-Studio panels.
* Debug information can be saved not only in the fss format, but in the rdr format, too. This format includes all file system meta data, but much less in size when a compressed disk image.
* Text/hexadecimal editor: The status bar now shows the cursor offset in the decimal format, too. It can be copied directly from the status bar.
* A new forensic log file is created only when the computer configuration has been changed. The CaseName/Number/Operator info is written to the forensic log for each session.
Changes:
= The Metadata file types are made invisible on the Known File Types dialog boxes. They are data on a disk rather than actual files, and have no effect on the search for known file types.
Bugfixes:
- R-Studio might crash when it tried to open a partition by file extensions or times. Fixed.
- Negative values might appear in input data fields when KB, MB, GB were changed. Fixed.
- A single byte might be pasted incorrectly through the Paste and Load From File commands. Fixed.
- Texts in the status bar might overlap. Fixed.
- Long texts in dialogs might be shown incorrectly. Fixed.
- Known File Types sets in the Settings and Disk Scan dialog boxes might be different. Fixed.
- R-Studio might crash when opening files on a disk. Fixed.
- R-Studio might crash during scan. Fixed.
- Names of several S.M.A.R.T. attributes were corrected.
- Incorrect work of the Select All and Clear All buttons on the Settings -> Known File Type tab. Fixed.
- Incorrect work of the Set as Default and Revert to Default buttons on the Scan -> Known File Type dialog box. Fixed.
- There was no inquiry about creating a new folder when it was specified in the Specify the target folder field. Fixed.
- When a large piece of data was being written to an unlocked disk in the Hexadecimal editor, the Lock Drive message appeared several times. Fixed.
- Selection disappeared when the cursor was moved in the Hexadecimal editor. Fixed.
- Selection in the Hexadecimal editor was not shown when the Select From command was activated. Fixed.
- Select, copy, and paste did not work in the Find dialog box in the Hexadecimal editor. Fixed.
- Some folders might be lost during recovery of symlinked folders. Fixed.
- The hidden attributes message might appear during Extra Found Files recovery when the Restore folder structure and Restore from root options were enabled. Fixed.
- Selected Known File Types could be changed only from the Settings tabs.
- Changes in customer's known file types were not applied immediately. Fixed.
- Region parameters were edited and created incorrectly. Fixed.
- R-Studio might start disk scan even when no file system and no known file types were selected.
Cosmetics
- The overall progress bar was not always be shown during data recovery. Fixed.
- Dialog boxes drop their values when the value changed from KB to GB
RAIDs
- R-Studio might crashed when saving RAID0 and RAID1E description files. Fixed.
- R-Studio might not load customer's RAID description files. Fixed.
- Parity settings might overwrite the number of rows. Fixed.
- Many cosmetic bugs were fixed.
Text/hexadecimal editor:
- Reverse Search From current position might start search from the end of file. Fixed.
- Text display and scrolling might work incorrectly. Fixed.
R-Studio for Linux 3.9.2015 Sat Jan 12, 2016
New features:
+ A new advanced algorithm for recovering exFAT partitions.
+ Support for Windows Storage Spaces created or updated by Windows 10 Threshold 2.
+ Support for unsynchronized Windows software RAIDs.
+ A new advanced algorithm for recovering exFAT partitions.
Improvements:
* RAID layout description files now store actual RAID parents. They can be automatically loaded into the RAID parents from the Drives list.
* The raw file recovery algorithm (search for Known File Types) is greatly improved. The entire file signature database was checked and corrected.
* R-Studio now detects PCI device id's, in addition to USB device id's. It writes them to the system dump.
Changes:
= A new format for RAID layout description files. The old RAID layout description files are still supported.
Bugfixes:
- Sometimes R-Studio could not find exFAT partitions during disk scan. Fixed.
- Custom offsets were selected incorrectly during automatic RAID parameter recognition. Fixed.
- When the Apply button became active after some changes in the RAID layout, it was necessary to click twice the Apply changes immediately option to activate it. Fixed.
- It was impossible to select Custom in the Block order option when a RAID layout type was selected. Fixed.
- An incorrect color code for 0 in RAID consistency check. Fixed.
- Sometimes free memory was displayed incorrectly. Fixed.
- R-Studio might incorrectly interpret compressed images for LDM disks. Fixed.
- Some cosmetic and localization bugfixes.
Build-in editor:
- The editor showed incorrect Windows time, DOS time, and Unix time. Fixed.
- Custom templates could not be loaded. Fixed.
- The editor hanged when trying to write something to Sector 0 in an off-line disk. Fixed.
R-Studio for Linux 3.9.1878 Thu Oct 22, 2015
Improvements:
* The raw file recovery algorithm (search for Known File Types) is seriously improved. The entire file signature database was checked and corrected.
* Improved Windows Storage Spaces processing: if their parents have time-inconsistent databases, the last valid database is selected.
Changes:
= Custom RAID layouts are created now a bit differently.
Bugfixes:
- When the Apply button became active after some changes in the RAID layout, it was necessary to click twice the Apply changes immediately option to activate it. Fixed.
- It was impossible to select Custom in the Block order option when a RAID layout type was selected. Fixed.
Sometimes a search for a file operation might result in a program crash. Fixed.
- File search for recursively interlinked files in Directory Junctions might result in an endless cycle. Fixed.
- The system might run out of memory when a system dump was being created for an image of a large (several TBs) disk with hundreds incremental/differential backups. Fixed.
- Sometimes it was impossible to create a custom RAID layout. Fixed.
- Some RAID description files could be loaded incorrectly. Fixed.
- Large Windows Storage Spaces (dozens of TBs) were processed incorrectly. Fixed.
- While checking RAID consistency, R-Studio showed sectors with 0 as consistent data (green), although it should be white. Fixed.
- Some cosmetic and localization bugfixes.
R-Studio for Linux 3.9.1831 Mon Aug 31, 2015
New features:
+ Improved emergency startup for UEFI computers.
+ An advanced algorithm for raw file recovery (search for file signatures).
+ The Hex editor extension: A file location is shown in a particular disk sector.
+ Support for Directory Junctions and Symbolic Links.
Improvements:
* Support for storage spaces in windows 10 RTM
* Improved support for NTFS $LogFile
* Improved file recovery from FAT32 disks
* The log data can now be appended to an existing file.
* Now R-Studio shows extra files found by their file signature both in the Raw Files folder and in recognized partitions.
* The file recovery algorithm has been optimized.
* When enumerating files on a FAT partition, R-Studio detects deleted files which cannot be correctly located due to corruptions in file systems made by Windows when it deletes a large number of files. In this case R-Studio throws a warning asking the user to scan the disk to locate those files correctly.
* Improved support for BIOS RAID in R-Studio Emergency and R-Studio Agent Emergency
Bugfixes:
- Sometimes R-Studio recovered simlinks as separate folders with the same content. Fixed.
- R-Studio might crash when many images were open one after another. Fixed.
- The Load/Save files list command might not work when files were sorted by extension or time stamps. Fixed.
- Several cosmetic fixes for the Settings dialog box.
- Cosmetic fixes for the S.M.A.R.T. tab.
- Slow recovery of many small files (>10,000). Fixed.
- Directory Junctions weren’t showed correctly under Windows. Fixed.
- The Save File Names to File didn’t work on the extension and time sorting tabs. Fixed.
- After the Load File Names command R-Studio switched to the tab from which the file names were saved. Fixed.
- The Add to RAID menu didn’t have scrolling. Fixed.
- R-Studio might not show the overall data recovery progress. Fixed.
- R-Studio sometimes didn’t show correctly progress for some operations like partition opening, imaging. Fixed.
- When working with DDI, the information in the Status: B/C column might disappear when switching the file sorting tabs (extension, times). Fixed.
- Sometimes R-Studio showed folders deleted from the root folder in Extra Found Files rather than in the root folder. Fixed.
- RAID consistency check once stopped could not be continued. Fixed.
- When recovering Directory Junctions, R-Studio might save files to the Directory Junctions symbolic paths rather than to the recovery path. Fixed.
- The Save File Names command didn’t work from the extension and time stamps tabs. Fixed.
- R-Studio asked to save scaninfo before initial scanning an opened image or loading scan info. Fixed.
- R-Studio attached recognized partitions from an opened dsk disk image to those on the original hard drive. Fixed.
- R-Studio cut text strings in the progress window. Fixed.
- Anytime the Settings were changed R-Studio asked to re-write its log. Fixed.
- The Maximum messages in the Event Log option on the Settings/Log tab didn’t work. Fixed.
- The Apply changes immediately option could be enabled only after the second click after changing parameters on the RAID Parents tab.
Hexadecimal editor:
- The changes buffer might work sloppy for very many changes. Fixed.
- An extra right character was saved to the file when a command Save to Hexadecimal File was performed for a selected area. Fixed.
- The Text/hexadecimal editor sometimes didn’t refresh its status bar. Fixed.
- The cursor might slightly get onto the next character. Fixed.
- Search was conducted over unchanged data if changes in the data had not been saved.
DeepSpar integration:
- When performing the Refresh command on the shortcut menu, R-Studio refreshed the previous DeepSpar disk. Fixed.
- R-Studio didn’t unmark files after the Clone marked file sectors command had been performed for DeepSpar disks. Fixed.
- The Clone file sectors command didn’t work when files were sorted by extension or timestamps. Fixed.
R-Studio for Linux 3.8.1670 Tue Mar 03, 2015
New features:
+ Accelerated disk scan for fast-read devices.
+ Search for deleted file versions. R-Studio for Linux can search for deleted file versions using their sizes, names and extensions, and recognized file types as the search parameters.
Improvements:
* More reliable and significantly faster recognition of NTFS and FAT partitions.
* Files found using both search for known file types and file record analysis are now shown only in the file/folder structure.
* Improved data selection in the Hexadecimal editor. Now the beginning and end of the area to be selected can be set by the Select from and Select to commands in the shortcut menu.
* Appending data to an existing file in the Hexadecimal editor. A file fragment selected in the editor can be appended to an existing file.
* An external file can be loaded to a selected position in the file opened in the Hexadecimal editor.
* The Hexadecimal editor shows the serial number for the parent hard drive when editing a virtual RAID.
* The Hexadecimal editor shows now a search position together with the progress bar.
* A max buffer size control for changes in the Hexadecimal editor is added to the Main tab of R-Studio for Linux Settings.
Bugfixes:
- Sometimes scan might freeze. Fixed.
- When a created virtual object like a region, RAID, image, etc, was deleted, its scan info remained somewhere under the root object Local Computer, and no command can be executed upon that info. Fixed, now R-Studio for Linux asks to save that scan info before deleting the object.
-When a connection to a remote computer was lost, all open tabs (disks or partitions) from that computer remained in R-Studio for Linux. Fixed.
- Incorrect log data for file recovery in the Demo mode: all files were counted as recovered, even they could not recover due to Demo mode restrictions. Fixed.
- Names, Labels, and File Systems were lost for objects in an exclusive region when it was edited. Fixed.
- It was impossible to enter hex values in the offset field in the Hexadecimal editor. Fixed.
- Sometimes data search didn't work in the Hexadecimal editor, and it was impossible to stop it. Fixed.
- Some settings like a path to the user's known file type file were GUI language-dependent. When the language was changed, they got lost, when the language was changed back, they appeared again. Fixed.
- Sometimes “Error creating system snap shot for...” appeared in the log when a FS Snapshot was created. Fixed.
R-Studio for Linux 3.7.1568 Thu Dec 18, 2014
New features:
+ Support for Linux Logical Volume Manager (LVM/LVM2). R-Studio can automatically recognize and assemble its volumes from their components even if RAID parameter records are slightly damaged. Components with severe corrupted RAID parameter records can be added manually.
+ Support for Windows Storage Spaces created by Windows 10. Now R-Studio can process WSS created by Windows 8/8.1 and 10, both with automatic recognition and manual adding their parents.
+ Support for Apple software RAIDs created by the OSX system. R-Studio can automatically recognize and assemble them from their members. Members with severe corrupted RAID parameter records can be added manually.
R-Studio for Linux 3.6.1466 Fri Oct 03, 2014
New features
+ Support for Windows Storage Spaces. R-Studio can automatically recognize and assemble Windows Storage Spaces from their parents even if their databases are slightly damaged. Their parents with severe corrupted storage pool databases can be added manually.
+ Support for DiskSpare Disk Imager (DDI) images and disk maps. R-Studio can read and process images and disk maps created by standalone DDI hardware.
Improvements:
* When recovering data over network, R-Studio now processes virtual block RAIDs, as other objects, on the remote side, avoiding large data transfers over the network.
* R-Studio Demo can recover files up to 256 KB.
* The scanning stop procedure is improved: scan information can be saved before stopping.
Bugfixes:
- Sometimes disks with bad sectors might be copied incorrectly. Fixed.
- Sometimes disk scans might freeze. Fixed.
- The progress bar might disappear while finding RAID parameters. Fixed.
- RAID 6 /Vertical Xor RAIDs parameters might display incorrectly. Fixed.
R-Studio for Linux 3.5.1347 Thu Jul 10, 2014
Improvements:
* Support for high dpi screens.
* R-Studio warns when attempting to connect to an already connected remote computer and blocks such attempt.
Bigfixes:
- Changing values for Virtual Memory on the Settings/Memory panel resulted in changes for Physical Memory, and vice versa. Fixed.
- The Memory size parameter was incorrectly manually edited on the Settings/Memory panel. Fixed.
- The Create scan information file option on the Create Image dialog box was enabled by default. Fixed.
- Old parameters remained after a new RAID parameter detection. Fixed.
- Negative values might appear in the Detection Rate during RAID parameter detection. Fixed.
R-Studio for Linux 3.5.1297 Tue Jun 10, 2014
Bugfixes:
1. Sizes of recognized partitions on virtual RAIDs might be shortened. Fixed.
2. R-Studio might show deleted files/folders which MFT records were occupied with new ones on wrong places. Fixed.
3. Sometimes Detection Rate might might show negative values during RAID parameter detection. Fixed.
4. A default Crash Report filename contained an illegal character :. Fixed.
5. R-Studio didn’t take into account folder’s hard links during file search. (It didn’t show files in hard links). Fixed.
R-Studio for Linux 3.5.1236 Thu May 29, 2014
New features:
+ Hardlink recovery for HFS+ and NTFS.
Bugfixes:
- When auto-detecting RAID parameters, R-Studio not always selected the best variant. Fixed.
- Incorrect symbols in the License Agreement. Fixed.
- Incorrect behavior of the Failed hardlink recovery dialog box. Fixed.
- The Create scan information option was selected by default on the Create Image dialog box. Fixed.
- R-Studio failed to create an image when a new folder was selected. Fixed.
- R-Studio might freeze when attempting to open a file of a multi-file image with some other files moved to another place. Fixed.
R-Studio for Linux 3.5.1143 Thu Apr 10, 2014
New features:
+ Reverse RAIDS: This technique enables the user to decompose a real disk object into a virtual RAID. Then those components of that reverse RAID can be processed like real objects. They can be viewed, edited, imaged, copied to physical drives, etc. This technique also can re-construct data on the real parents of a virtual RAID, on a missing disk, for example.
+ S.M.A.R.T. attribute monitoring. R-Studio can display S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) attributes for hard drives to show their hardware health and predict their possible failures. Any unnecessary work with such hard drives should be avoided if S.M.A.R.T. warnings appear.
+ New GUI languages added: Traditional and Simplified Chinese, Japanese, and Portuguese.
Improvements:
* Known File Type parsing is improved.
* Support for HFS+ folder hardlinks.
Bugfixes:
- R-Studio might freeze when analyzing file systems with cyclic cross-links. Fixed.
- R-Studio didn’t deliver any messages when it didn’t find any offset while detecting RAID parameters. Fixed.
- R-Studio didn’t send block size of a detected RAID to the RAID parents window. Fixed.
- R-Studio didn’t warn its user that is was going to overwrite an existing scan info or image file. Fixed.
- The Hexadecimal editor might freeze after an I/O error. Fixed.
- A Check RAID consistency process could not be resumed after a stop unless the RAID was re-created. Fixed.
- It was possible to connect a single remote computer any times, and the same numbers of that remote computer would appear in the Drives panel. Fixed.
- Many cosmetic bugs.
R-Studio for Linux 3.0.798 Thu Oct 31, 2013
New features:
+ Automatic RAID parameter recognition. R-Studio can recognize all RAID parameters for RAID 5 and 6. This feature helps the user to solve one of the most difficult problems in RAID recovery - RAID parameter recognition.
+ Support for parity delays in all applicable RAID layouts.
Improvements:
* Enhanced parity delay controls.
Bugfixes:
- Several connections from the same remote computer were possible. Fixed.
- R-Studio didn’t warn about losing informaiton on a virtual RAID upon its closure. Fixed.
- No warning was displayed about an attempt to re-write existing scan info during simultaneous disk scan and image creation. Fixed.
- The RAID sequences window dissapered. Fixed.
- Several cosmetic bugfixes.
R-Studio for Linux 2.1.476 Jun 14, 2013
New features:
+ Support for RAID5 with parity delays often used in HP servers.
+ Support for new RAID levels: RAID10 (1+0), RAID1E, RAID5E, RAID5EE, RAID6E.
+ A new file previewer that supports additional file formats: Adobe Acrobat pdf, Microsoft Office documents doc, xls, ppt (Office 97-2003), docx, xlsx, pptx.
+ Support for ReFS (Resilient File System), a new local file system Microsoft introduced in its Windows 2012 Server.
Improvements:
* Almost all R-Studio's files (images, scan info, logs, etc.) can be saved to and load from, a remote computer.
* R-Studio stores the name and path to the file stored on the remote computer.
* When a file name is stored, R-Studio inserts the line end marks depending on the OS.
* When a file name is specified for RAID layout presets, it's automatically added to the settings.
Bugfixes:
- R-Studio might incorrectly recover non-Latin characters in file / folder names (changed to spaces). Fixed.
- R-Studio might crash when connection to a remote computer was stopped. Fixed.
- R-Studio might crash when some RAID parameters were changed on the Parents tab. Fixed.
- A strange symbol might appear in a RAID table. Fixed.
- R-Studio might crash when the RAID consistency check window was closed. Fixed.
- R-Studo Agent for Linux couldn't connect to R-Studio. Fixed.
- R-Studio might crash after scanning a remote computer and saving scan info. Fixed.
- R-Studio didn't ask for a RAID layout preset file name and didn't save it. Fixed.
- R-Studio might crash when a file type description is removed from File Type Editor. Fixed.
- R-Studio might show incorrect info about file sizes and number of folders. Fixed.
- R-Studio might show incorrect number of marked files and their sizes. Fixed.
- R-Studio might perform file find/mark incorrectly. Fixed.
- Sometimes R-Studio might save recovered files to its local folder.
- File Previewer didn’t show non-Latin characters in file names. Fixed.
- The Do you want to remove loaded File Type Definitions right now? message might appear when some settings were changed on the Main tab of the Settings dialog box. Fixed.
- Many cosmetic bugfixes.
R-Studio for Linux 2.0 Build 371 Jun 20, 2012
New features:
+ Simultaneous image creation and scan. Now R-Studio can create an image and simultaneously scan the data being copied. In this case R-Studio creates two files stored at the same place: an image file and file with the scan info.
+ File Recovery Lists: lists of files found on disks that can be exported out of R-Studio, manually edited, than imported back, and files from those lists will be automatically marked for recovery. Such lists are very useful if you want someone who is far away to decide which files are to recover and which aren’t to.
+ RAID consistency check: you may check whether the parity blocks on a RAID are valid.
+ Image and scan info files may be saved on and load from, remote computers. This helps R-Studio to avoid transferring large data volumes over network during network recovery.
Improvements:
* R-Studio processes HFS and FAT file systems much faster.
* R-Studio processes Known File Types much faster.
Bugfixes.
- Sometimes, R-Studio might crash during disk scan. Fixed.
- Some bugs in the Region and Exclusive Region dialog boxes are fixed.
- On the Find/Mark and File Mask dialog boxes, it was possible to enter inconsistent data interval into the between field. Fixed.
R-Studio for Linux 1.0 build 229 Oct 29, 2011
Improvements:
* The GUI language can be changed on-the-fly.
* Explicit specification of any IP address for incoming connections.
* R-Studio now deletes dot and space at the end of the names of recovered files and folders. Windows Explorer and many other programs cannot open such files. They can be opened only if they are opened using their URI (The full path started with //).
Bugfixes
- Some bugs for x64 architecture under modern releases. Fixed.
- Corrections in the French localization.
- Possible crashes during scan and opening of files.
- Search might not work is some parameters are entered into the Find/Mark dialog box. Fixed.
- A bug when the Extension и Description fields were edited in the Edit User's File Types dialog box. Fixed.
- An image file might not be saved on a FAT32 disk if Image split size Fixed on the Create Image dialog box is selected as 4Gb FAT32. Fixed.
- Connect to Remote might not work properly sometimes. Fixed.
- Sometimes R-Studio could freeze while scanning. Fixed.
- Some bugs are fixed in the module loading Known File Types and RAID description files.
- The Wait dialog box could incorrectly show file names during their recovery. Fixed.
- The GUI known file type editor could save several signatures as fffff. Fixed.
- Some small interface bugs.
R-Studio for Linux 1.0.150 Dec 18, 2010
Product launch