Scan of disk img stuck at 100%.
Scan of disk img stuck at 100%.
I'm trying to demo mode out on my disk image of an ext4 filesystem, on a Linux livecd, just to see what R-Studio's scan can find before making a purchase. I ran the disk scan in the mode without output, and it's currently just sitting at 100% with 3.64 TB (size of the image) scanned. I cannot select any other options other than stopping the scan. should I eventually be able to see some files once this scan finishes up, or is the program stuck in an unrecoverable state?
-
- Posts: 220
- Joined: Tue Oct 20, 2015 10:13 am
- Location: Providence, RI USA
- Contact:
Re: Scan of disk img stuck at 100%.
After it's done scanning, you should see a list of found file systems on the left. You just need to click the green one and open it up now.
Re: Scan of disk img stuck at 100%.
I can tell you one secret: You may use R-Linux to test R-Studio. Having the same data recovery engine, it recovers data from ext4fs partitions for free. Both programs share the same compressed image and scan info format.
And I recommend you to save the scan info if you're really going to recover files from the image.
And I recommend you to save the scan info if you're really going to recover files from the image.
Re: Scan of disk img stuck at 100%.
Thanks. I didn't see R-Linux on the website. The scan completed and found files. If I want to get directory structures back along with file names, which options should I click when recovering files?
Re: Scan of disk img stuck at 100%.
Select Restore folder structure on the Recover dialog box.zerophase wrote:If I want to get directory structures back along with file names, which options should I click when recovering files?
Re: Scan of disk img stuck at 100%.
Hmm, the Ubuntu live cd keeps freezing after running R-linux file recovery for about half an hour.
So, I went ahead and tried the version of R-Linux for fedora/redhat, and the menus aren't displaying any text or icons, after installing the 64 bit rpm. If I launch the program from a terminal these are the error messages I receive.
Just needed to add:
to get the gui working.
So, I went ahead and tried the version of R-Linux for fedora/redhat, and the menus aren't displaying any text or icons, after installing the 64 bit rpm. If I launch the program from a terminal these are the error messages I receive.
Code: Select all
X Error: BadAccess (attempt to access private resource denied) 10
Extension: 130 (MIT-SHM)
Minor opcode: 1 (X_ShmAttach)
Resource id: 0x13d
X Error: BadShmSeg (invalid shared segment parameter) 128
Extension: 130 (MIT-SHM)
Minor opcode: 5 (X_ShmCreatePixmap)
Resource id: 0x2a00013
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x2a00014
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x2a00014
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x2a00014
X Error: BadShmSeg (invalid shared segment parameter) 128
Extension: 130 (MIT-SHM)
Minor opcode: 2 (X_ShmDetach)
Resource id: 0x2a00013
X Error: BadAccess (attempt to access private resource denied) 10
Extension: 130 (MIT-SHM)
Minor opcode: 1 (X_ShmAttach)
Resource id: 0x13d
X Error: BadShmSeg (invalid shared segment parameter) 128
Extension: 130 (MIT-SHM)
Minor opcode: 5 (X_ShmCreatePixmap)
Resource id: 0x2a0001e
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x2a0001f
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x2a0001f
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x2a0001f
X Error: BadShmSeg (invalid shared segment parameter) 128
Extension: 130 (MIT-SHM)
Minor opcode: 2 (X_ShmDetach)
Resource id: 0x2a0001e
[zerophase@localhost ~]$ sudo rlinux
X Error: BadAccess (attempt to access private resource denied) 10
Extension: 130 (MIT-SHM)
Minor opcode: 1 (X_ShmAttach)
Resource id: 0x13d
X Error: BadShmSeg (invalid shared segment parameter) 128
Extension: 130 (MIT-SHM)
Minor opcode: 5 (X_ShmCreatePixmap)
Resource id: 0x2a0000f
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x2a00010
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x2a00010
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x2a00010
X Error: BadShmSeg (invalid shared segment parameter) 128
Extension: 130 (MIT-SHM)
Minor opcode: 2 (X_ShmDetach)
Resource id: 0x2a0000f
X Error: BadAccess (attempt to access private resource denied) 10
Extension: 130 (MIT-SHM)
Minor opcode: 1 (X_ShmAttach)
Resource id: 0x13d
X Error: BadShmSeg (invalid shared segment parameter) 128
Extension: 130 (MIT-SHM)
Minor opcode: 5 (X_ShmCreatePixmap)
Resource id: 0x2a0001a
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x2a0001b
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 62 (X_CopyArea)
Resource id: 0x2a0001b
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x2a0001b
X Error: BadShmSeg (invalid shared segment parameter) 128
Extension: 130 (MIT-SHM)
Minor opcode: 2 (X_ShmDetach)
Resource id: 0x2a0001a
Code: Select all
export QT_X11_NO_MITSHM=1
Re: Scan of disk img stuck at 100%.
A little late to this thread but I'm in the same situation.
I'm doing a scan of a 512gb section of my 4TB drive, it's been at 100% for over 24 hours.
How long did it take your scan to complete and list found files?
Thanks!
I'm doing a scan of a 512gb section of my 4TB drive, it's been at 100% for over 24 hours.
How long did it take your scan to complete and list found files?
Thanks!
Re: Scan of disk img stuck at 100%.
Any error messages from R-Studio?mattwood2000 wrote: ↑Fri May 12, 2023 10:32 amA little late to this thread but I'm in the same situation.
I'm doing a scan of a 512gb section of my 4TB drive, it's been at 100% for over 24 hours.
How long did it take your scan to complete and list found files?
Thanks!
-
- Posts: 3
- Joined: Fri May 12, 2023 10:33 am
Re: Scan of disk img stuck at 100%.
No error message. I'm surprised there has not been any output at all for anything when launching from the terminal.Alt wrote: ↑Fri May 12, 2023 12:43 pmAny error messages from R-Studio?mattwood2000 wrote: ↑Fri May 12, 2023 10:32 amA little late to this thread but I'm in the same situation.
I'm doing a scan of a 512gb section of my 4TB drive, it's been at 100% for over 24 hours.
How long did it take your scan to complete and list found files?
Thanks!
I stopped the scan and it actually saved the state this time (6.2.191150) which I have been able to reload and find a recognized partition which matches the lost data). But I've got another issue which I'll post in a different thread.
I need to revisit this scan later, but right now my priority is getting the data back from the recognized partition.
Thanks!