Page 1 of 1

PCI SSD Not found

Posted: Thu Jul 18, 2019 8:02 am
by tdhaslett
Hi All,
I am trying to create an image for a new crop of HP EliteDesk 800 G4 SFF PCs that we are deploying and when selecting the source drive, the computer's PCI SSD does not appear in the list. The controller is an Intel 300 Series Chipset Family SATA AHCI Controller, which should be pretty standard, really. The driver version is 16.7.1.1012 and is dated 8/24/2018.

We are using R-Drive Image version 6.0.xxxx. I tried downloading the newest version under a trial and creating a new startup disk to test, but it still did not find it. I have also disabled all of the boot security in the HP BIOS. At least, I think I got it all.

What should I be looking to in order to get this working?

Thanks!

Re: PCI SSD Not found

Posted: Sun Jul 21, 2019 1:14 pm
by Alt
Please, try our newest version. If it doesn't help, contact our techsupport with this issue. They'll need the system dump of this computer. (About -> System dump).

Re: PCI SSD Not found

Posted: Mon Jul 22, 2019 8:07 am
by tdhaslett
As I mentioned above, we did try the newest version. I think that was on Wednesday, 7/17. Was there another newer version since then?

Re: PCI SSD Not found

Posted: Mon Jul 22, 2019 10:05 am
by tdhaslett
Okay, I downloaded the current trial and noticed that the file sizes were different. I also saw when starting the install that it is a new minor version number.

Good news is that it worked! We can now see the drive.

Thanks for your suggestion. I would not have tried downloading a new version so quickly after my first try.