Data Recovery and Disk Utilities Forum @R-TT

A new build of R-Drive Image is available for download.
New features
+ SMB/Cloud connections from the host system can now be included into the startup version.

Improvements
* The speed of imaging NTFS partitions in the Linux startup version has been greatly increased.

Bugfixes
- A network drive couldn't be connected if the Password field was empty. Fixed.
- A pure volume couldn't be resized while copying. Fixed.
- Several internal and cosmetic bugfixes.

booting 7.3.7312 from USB shows

cannot open display "default display"

it happens on 3 different PC`s in UEFI mode (CSM is ok) But with version 7.3.7310 all works fine!

Sorry for the long delay.
Please, boot into the safe video mode (or into the TUI, if the safe mode fails) and create a system dump. Then go to our Technical support and create a support request. Please provide a link to this topic. They'll ask you to send the system dump.

I have the same problem with version 7.3.7312 and 7.3.7214.
Version 7.3.7310 is fine.

BluePT wrote: ↑

Wed Feb 25, 2026 7:16 am

I have the same problem with version 7.3.7312 and 7.3.7214.
Version 7.3.7310 is fine.

Do you mean 7.3.7_3_14?

yes, 7.3.7314. (latest build). My fault.

The problem happens with some pc's.
I tested in 2 pc's:

1) PC with AMD Ryzen CPU and ASUS x570 chipset mobo, Nvidia 2070 Super graphics card:
No problems.

2) PC with Intel 9th gen CPU and ASUS x390 chipset mobo, Nvidia 4060ti graphics card:
Error "no screens found" (cannot open display "default display") when using linux usb boot disk.

The problem happens in UEFI mode. If "CSM compatible mode" is enabled all works fine.
WinPE boot disk works fine in all situations.

Have you created a support request? They will help you to solve the problem. They'll need the system dump to understand what's going on. The information you provided isn't enough to determine what prevents R-Drive Image from normal work.