Recovery CD 4.7.4737
Posted: Thu Apr 05, 2012 3:40 am
just created a linux cd image and booted from it
everything is fine except that program can't see any hdd on my laptop Dell Vostro 1710 with latest bios on it
the same problem is encountered with R-Studio Network Emergency Linux based CD (5.4.506)
oh that laptop i have installed two SATA hdd (160GB and 250GB)
tried to change hdd access mode from bios (from AHCI to SATA) = same results (no hdd is detected)
it seems that is a problem with ICH8 drivers...
P.S.
tried a similar product paragon hdm 11 linux cd (based on 2.6.37 kernel) and everything is fine there - both hdd are detected and showed
any ideea ?
thx !
everything is fine except that program can't see any hdd on my laptop Dell Vostro 1710 with latest bios on it
the same problem is encountered with R-Studio Network Emergency Linux based CD (5.4.506)
oh that laptop i have installed two SATA hdd (160GB and 250GB)
tried to change hdd access mode from bios (from AHCI to SATA) = same results (no hdd is detected)
it seems that is a problem with ICH8 drivers...
P.S.
tried a similar product paragon hdm 11 linux cd (based on 2.6.37 kernel) and everything is fine there - both hdd are detected and showed
any ideea ?
thx !