Improvements for R-Studio

Discussions on using the professional data recovery program R-STUDIO for RAID re-construction, NAS recovery, and recovery of various disk and volume managers: Windows storage spaces, Apple volumes, and Linux Logical Volume Manager.
pclab
Posts: 5
Joined: Fri Aug 18, 2017 9:11 am

Improvements for R-Studio

Post by pclab » Mon Dec 04, 2017 9:06 am

Hi Guys

I had a case here with a Lenovo NAS where after I connect both drives to the PC, using R-studio I needed to create and configure the RAID with all the parameters.
But using UFS explorer, it automatically detected those details and the partition showed immediately without any trouble. I just copied the data out.

I think you could improve this also in R-Studio.

Thanks

Alt
Site Moderator
Posts: 2275
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Improvements for R-Studio

Post by Alt » Mon Dec 04, 2017 11:27 am

What is the NAS model, and what is the R-Studio version?

pclab
Posts: 5
Joined: Fri Aug 18, 2017 9:11 am

Re: Improvements for R-Studio

Post by pclab » Mon Dec 04, 2017 4:45 pm

Hi

It was a Lenovo IX2 using latest version of R-Studio.

Data-Medics
Posts: 150
Joined: Tue Oct 20, 2015 10:13 am
Location: Providence, RI USA
Contact:

Re: Improvements for R-Studio

Post by Data-Medics » Mon Dec 04, 2017 5:33 pm

Is that one that runs EMC OS? If so, it's probably gonna be an expensive case...

pclab
Posts: 5
Joined: Fri Aug 18, 2017 9:11 am

Re: Improvements for R-Studio

Post by pclab » Tue Dec 05, 2017 3:32 am

It wasn't very expensive, because UFS could read the data imediately :D

Data-Medics
Posts: 150
Joined: Tue Oct 20, 2015 10:13 am
Location: Providence, RI USA
Contact:

Re: Improvements for R-Studio

Post by Data-Medics » Tue Dec 05, 2017 4:45 pm

So I guess not the EMC OS one. I've just see a few of their NASs advertised as having EMC OS as the operating system. Maybe it's just some EMC branding (I hope) and not a bonafide EMC Unix OS on there. I keep dreading when those start showing up.

pclab
Posts: 5
Joined: Fri Aug 18, 2017 9:11 am

Re: Improvements for R-Studio

Post by pclab » Wed Dec 06, 2017 4:02 am

To be honest, I didn't even checked if the NAS was working or not.
Just pulled the HDD's off, imaged them, connect to a PC and UFS did the rest

Post Reply