HP DL360 G9 - Raid 0+1

Discussions on using the professional data recovery program R-STUDIO for RAID re-construction, NAS recovery, and recovery of various disk and volume managers: Windows storage spaces, Apple volumes, and Linux Logical Volume Manager.
av_admin
Posts: 7
Joined: Thu Apr 07, 2022 8:50 am

Re: HP DL360 G9 - Raid 0+1

Post by av_admin » Wed Apr 13, 2022 1:09 pm

Okey
Yes the logical drives are in raid disk
the raid are 0+1
the fily systme is EXT4 for linux and it was installed under the VMWare ESXI
The ESXI file system is : vmdk
I hope this is help you

Alt
Site Moderator
Posts: 2866
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: HP DL360 G9 - Raid 0+1

Post by Alt » Thu Apr 14, 2022 11:04 am

Try to install R-Studio into the virtual machine and scan the RAID. This article may be of some help you Data Recovery from a Reformatted Ext2/3/4FS Disk. Your case is not about disk format, but the general course of action should be the same.
As your disks are SSD, this article needs your attention: File Recovery Specifics for SSD and Other Devices Supporting the TRIM/UNMAP command. Most likely your RAID 0+1 doesn't use the TRIM/UNMAP command, but still...

Post Reply