R-Studio for RAID 5 Recovery
Posted: Wed Feb 10, 2010 12:35 pm
First of all, I have to say that I am impressed by what your software can achieve.
Now the problem: I have A WD Sharespace With 4*1TB disks in RAID 5
When I connect those drives to my pc and startup R-Studio, I can see that on all disks there are 4 partitions, 3 little ones and one Big one (around 980 GB)
I took the whole drives to put in a virtual RAID 5, but when I scanned for a filesystem, i received a lot of images and stuff that weren't on those disks. So i made an array with only the big partitions, who are supposed to be NTFS. When i scan those I can see some video files, but when I recover those, they skip every second from one file to the other, is that because I used wrong parameters?
(I tried following the document finding RAID parameters, but the Bios parameter block in the NTFS boot sector is totally empty)
I hope you can help me, I read alot of threads on this forum, found 1 case that resembles mine, but the solution was not given. ( http://forum.r-tt.com/viewtopic.php?f=13&t=407 )
Now the problem: I have A WD Sharespace With 4*1TB disks in RAID 5
When I connect those drives to my pc and startup R-Studio, I can see that on all disks there are 4 partitions, 3 little ones and one Big one (around 980 GB)
I took the whole drives to put in a virtual RAID 5, but when I scanned for a filesystem, i received a lot of images and stuff that weren't on those disks. So i made an array with only the big partitions, who are supposed to be NTFS. When i scan those I can see some video files, but when I recover those, they skip every second from one file to the other, is that because I used wrong parameters?
(I tried following the document finding RAID parameters, but the Bios parameter block in the NTFS boot sector is totally empty)
I hope you can help me, I read alot of threads on this forum, found 1 case that resembles mine, but the solution was not given. ( http://forum.r-tt.com/viewtopic.php?f=13&t=407 )