Page 1 of 1
Deleted raid 5 disk array, any chance to recover data?
Posted: Wed Sep 25, 2019 11:10 am
by Jinks32
Hello,
I've deleted a raid 5 array from a MSA2324fc, is there a way to recover the data? I didn't recreate the array after.
Thanks
Re: Deleted raid 5 disk array, any chance to recover data?
Posted: Wed Sep 25, 2019 1:11 pm
by RForce
You'll need to have direct access to each of the drives, bypassing the RAID controller, in read-only mode. Best practice would be for you to get a full sector-by-sector clone or image of each drive and then work with the copies. Then, assuming that the RAID had a file system supported by R-Studio, you throw in the RAID config into R-Studio and let it virtually reconstruct the array so that you can copy the data out to a new hard drive.
You'll need to know the drive order, the block size, offsets (particularly for any virtual RAIDs), parity order, parity size and parity delays.
Re: Deleted raid 5 disk array, any chance to recover data?
Posted: Wed Sep 25, 2019 2:00 pm
by Alt
You may also use
ReclaiMe Free RAID Recovery to find RAID parameters.
Re: Deleted raid 5 disk array, any chance to recover data?
Posted: Sun Sep 29, 2019 5:34 am
by Jinks32
Thanks!