Page 1 of 1

Finding parameters for Raid 0.

Posted: Fri May 07, 2010 12:14 pm
by phillipfranco55
Ive read this guide http://www.data-recovery-software.net/A ... ndex.shtml but it is for raid 5 and im getting all 0's when it tells me to change the templates drop down box to "Boot Sector NTFS" on my raid 0 (which is the drive with the MBR).
The only parameters I know for sure is which drive has the MBR, and I am having trouble finding the rest of the parameters using this guide. So I was wondering if there are different steps to finding the Raid 0 Parameters than using the guide here for raid 5. I am using images of the data on the drives to do the hex edit.

Re: Finding parameters for Raid 0.

Posted: Mon May 10, 2010 6:13 am
by Alt
What is the RAID controller?