Raid 0 Problems

Discussions on using the professional data recovery program R-STUDIO for RAID re-construction, NAS recovery, and recovery of various disk and volume managers: Windows storage spaces, Apple volumes, and Linux Logical Volume Manager.
azmatt
Posts: 1
Joined: Tue Apr 28, 2009 8:44 am

Raid 0 Problems

Post by azmatt » Tue Apr 28, 2009 8:54 am

I have 2 250GB drives from an RAID zero hooked up via usb connectors. As you can hopefully see from t he image, one drive shows up with partitions, the other just shows up with no information.
Image

When I create a virtual stripe set, add the drives and scan them I can see a lot of the file structure, but nothing except for a few very small .gifs show in preview. Also, when I go to open the files, I get about 40 of these types of errors

Warning File system 4/28/2009 6:35:33 AM [FileId: 16] Fixup 2 is 0x0, but should be 0x2
Warning File system 4/28/2009 6:35:33 AM [FileId: 80] Fixup 2 is 0x0, but should be 0xf
Warning File system 4/28/2009 6:35:33 AM [FileId: 272] Fixup 2 is 0x0, but should be 0x2
Warning File system 4/28/2009 6:35:33 AM [FileId: 336] Fixup 2 is 0x0, but should be 0x9
Warning File system 4/28/2009 6:35:33 AM [FileId: 848] Fixup 2 is 0x0, but should be 0x9
Warning File system 4/28/2009 6:35:33 AM [FileId: 1296] Fixup 2 is 0x0, but should be 0x6
Warning File system 4/28/2009 6:35:33 AM [FileId: 1808] Fixup 2 is 0x0, but should be 0x6



Does this mean that one of the drives is bad, or is there something I can try in order or another setting to try to tweak this? I'm somewhat experienced in computer forensics, but 100% new to raid recovery.

Thanks,

Matt

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Raid 0 Problems

Post by Alt » Wed Apr 29, 2009 3:25 pm

Most likely you specified an incorrect stripe size parameters. Try to play with them.

Post Reply