Data Recovery and Disk Utilities Forum @R-TT

I have 2 250GB drives from an RAID zero hooked up via usb connectors. As you can hopefully see from t he image, one drive shows up with partitions, the other just shows up with no information.


When I create a virtual stripe set, add the drives and scan them I can see a lot of the file structure, but nothing except for a few very small .gifs show in preview. Also, when I go to open the files, I get about 40 of these types of errors

Warning File system 4/28/2009 6:35:33 AM [FileId: 16] Fixup 2 is 0x0, but should be 0x2
Warning File system 4/28/2009 6:35:33 AM [FileId: 80] Fixup 2 is 0x0, but should be 0xf
Warning File system 4/28/2009 6:35:33 AM [FileId: 272] Fixup 2 is 0x0, but should be 0x2
Warning File system 4/28/2009 6:35:33 AM [FileId: 336] Fixup 2 is 0x0, but should be 0x9
Warning File system 4/28/2009 6:35:33 AM [FileId: 848] Fixup 2 is 0x0, but should be 0x9
Warning File system 4/28/2009 6:35:33 AM [FileId: 1296] Fixup 2 is 0x0, but should be 0x6
Warning File system 4/28/2009 6:35:33 AM [FileId: 1808] Fixup 2 is 0x0, but should be 0x6


Does this mean that one of the drives is bad, or is there something I can try in order or another setting to try to tweak this? I'm somewhat experienced in computer forensics, but 100% new to raid recovery.

Thanks,

Matt

Most likely you specified an incorrect stripe size parameters. Try to play with them.