Thecus NAS RAID 0 recovery
Posted: Thu Aug 11, 2011 2:16 am
Hi,
I have 5x 1TB disks in RAID0 on Thecus NAS 5200. One disk is very unstable... with R-Studio, if I create 5 mirror image of the disks (of course if the bad disk is accessible...but the problem is certainly of the logic board so i can use one of the 4 functional..), with virtual RAID can I rebuild the RAID 0 and access a EXT-3 partition?
many thanks
I have 5x 1TB disks in RAID0 on Thecus NAS 5200. One disk is very unstable... with R-Studio, if I create 5 mirror image of the disks (of course if the bad disk is accessible...but the problem is certainly of the logic board so i can use one of the 4 functional..), with virtual RAID can I rebuild the RAID 0 and access a EXT-3 partition?
many thanks