Broken RAID 0 on Mac OS X
Posted: Sun Apr 15, 2012 4:17 pm
I´m trying to figure out a way to repair a Software RAID 0 which I accidently resolved via diskutility. The disks are untouched and found by diskutil as follows:
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk0
1: EFI 209.7 MB disk0s1
2: Apple_RAID_Offline 2.0 TB disk0s2
3: Apple_Boot Boot OSX 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI 209.7 MB disk1s1
2: Apple_HFS CK 999.9 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk2
1: EFI 209.7 MB disk2s1
2: Apple_RAID_Offline 2.0 TB disk2s2
3: Apple_Boot Boot OSX 134.2 MB disk2s3
diskutil listraid
No AppleRAID sets found
The RAID disks are found and marked offline, is there any chance to put them together again?
Today I tried R-Studio Demo. No matter what block size and number of rows it always finds the same amount of data.
It shows the original structure but all indicated original folders files say 0 Bytes. They also have a simple Data icon.
Data files seem to be of correct size.
Before I buy the software I would like to be sure not to recover empty files.
I tried to add a screenshot here, but it didn´t work.
I appreciate any suggestions. Thanks!
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk0
1: EFI 209.7 MB disk0s1
2: Apple_RAID_Offline 2.0 TB disk0s2
3: Apple_Boot Boot OSX 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI 209.7 MB disk1s1
2: Apple_HFS CK 999.9 GB disk1s2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *2.0 TB disk2
1: EFI 209.7 MB disk2s1
2: Apple_RAID_Offline 2.0 TB disk2s2
3: Apple_Boot Boot OSX 134.2 MB disk2s3
diskutil listraid
No AppleRAID sets found
The RAID disks are found and marked offline, is there any chance to put them together again?
Today I tried R-Studio Demo. No matter what block size and number of rows it always finds the same amount of data.
It shows the original structure but all indicated original folders files say 0 Bytes. They also have a simple Data icon.
Data files seem to be of correct size.
Before I buy the software I would like to be sure not to recover empty files.
I tried to add a screenshot here, but it didn´t work.
I appreciate any suggestions. Thanks!