Data Recovery from DELL PERC 6i Raid10

Discussions on using the professional data recovery program R-STUDIO for RAID re-construction, NAS recovery, and recovery of various disk and volume managers: Windows storage spaces, Apple volumes, and Linux Logical Volume Manager.
wingsoft
Posts: 6
Joined: Wed Oct 23, 2013 7:35 am

Data Recovery from DELL PERC 6i Raid10

Post by wingsoft » Wed Oct 23, 2013 7:42 am

Hi,
we've just buy the R-STUDIO licence in order to recovery data from a RAID10 Array of a Dell PE with PERC6i raid controller
that crashed after a electical crash,.
We've attached all the drive ( no one is damnaged) to a PC for recovery.
Started from "Emergency BOot" the rstudio asked me what to do.

I create a RAID ...
which kind of raid type. I have to choose?
- Virtual Volume Set
- Create Virtual Mirror
- Create Virtual Block RAID & AUtodetect

Thanks a lot

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Data Recovery from DELL PERC 6i Raid10

Post by Alt » Wed Oct 23, 2013 8:22 am

You may learn how to create a RAID10 on our on-line help: RAID10 (1+0).

wingsoft
Posts: 6
Joined: Wed Oct 23, 2013 7:35 am

Re: Data Recovery from DELL PERC 6i Raid10

Post by wingsoft » Wed Oct 23, 2013 8:28 am

Thank for your reply.
So I've done everything ok!
I've found a GREEN PARTITION with many others ORANGE with a number.
I've tryed to open files from the Green one ( is it right? ) but ALL the files are damnaged!
What can I do?
Maybe a "Check RAID Consistency" can help me?

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Data Recovery from DELL PERC 6i Raid10

Post by Alt » Wed Oct 23, 2013 8:36 am

First, you should check that the disk order and other RAID parameters are correct.

wingsoft
Posts: 6
Joined: Wed Oct 23, 2013 7:35 am

Re: Data Recovery from DELL PERC 6i Raid10

Post by wingsoft » Wed Oct 23, 2013 8:50 am

The Drives are connected in the same order of server
And the RAID10 parameters are the default.
When I click to "Open files" the log gives me a lot of

WARNING : Fixup 2 is ... but should be...


Could be a good idea to click the auto detect of RAID ?
When I click it it gives me " 1 year..." to complete..

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Data Recovery from DELL PERC 6i Raid10

Post by Alt » Wed Oct 23, 2013 9:12 am

wingsoft wrote:Could be a good idea to click the auto detect of RAID ?
When I click it it gives me " 1 year..." to complete..
No, that feature works only for RAID5 and 6.

About the default parameters:
Are they default in R-Studio or in the server?

wingsoft
Posts: 6
Joined: Wed Oct 23, 2013 7:35 am

Re: Data Recovery from DELL PERC 6i Raid10

Post by wingsoft » Wed Oct 23, 2013 9:23 am

NEws:
I've re-check the order of my drive.
Strange thing happened:
- Set (based on Hdd s/n) the order in the backplane in the Server
- If I follow the order 0,1,2,3 nothing appear... If I set my HHD nr 0 to the 4th position, in the RAID appear my partions!!! (also with disk label)

Thanks a good news I hope..!!
But ... I go on to experience the warning:

WARNING : Fixup 2 is ... but should be...

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Data Recovery from DELL PERC 6i Raid10

Post by Alt » Thu Oct 24, 2013 10:34 am

wingsoft wrote: But ... I go on to experience the warning:

WARNING : Fixup 2 is ... but should be...
Something wrong with the MFT. It may be a serious problem, may be not, depending on any specific case.

Post Reply