Data Recovery and Disk Utilities Forum @R-TT

God, I'm glad that I said something...no, I haven't done that, but I will do that...thank you! Will report back...

OK. Waiting for information.

Hello,

it's funny because i'm encounting the exact same kind of issue with 2 disks from a Lacie 2Big Quadra on which i got almost 2 years of backup sessions of my recording studio, and i really need to have an access to those disks. Here are the facts :

For some unknown reason, the 2 disks didn't mount anymore a month ago. After some posts with Lacie, I finally found that the Lacie Box is broken so now i got those 2 disks inside my mac pro and i can only see them via terminal or r-studio. It's like there are no partitions in it.

After some search i found you, tried the demo version, ran a scan and did some other stuff, and tonight i'm reading this post and i'm wondering if you found some solutions to your problem because i was thinking you might be the only solution i found.

Please let me know

Can you post the screenshot of R-Studio's Drives panel with the LaCie drives.

i appreciate you answered me:)
i'm actually processing a copy of one of my disk with terminal, sudo dd.... so i'm not sure i can do something right now but i sure will do it.
At this moment i only have a screenshot of the first scan i made in the very beginning, with those 2 disks i've put in another Lacie bay i got, connected in F800. If you need something more specific, please let me know and i'll do it.

Well, I need the screenshot of R-Studio with those LaCie disks connected. Depending of your initial LaCie setting, you need to assemble them as a RAID0 or 1.

ok, so do i need to run a scan on both drives ?

french wrote: ↑

Fri Jun 22, 2018 8:54 am

ok, so do i need to run a scan on both drives ?

No. You need to create a virtual RAID0 (most likely) or RAID1 - depending on the settings of your LaCie 2BigQuadra and scan it. The problem will be with the RAID parameters. Maybe, LaCie techsupport could help. And scan that RAID.

got it...i'll do that and let you know (will try to get some info from Lacie but i think they won't help me)
thanks

So here is a capture of the scan for the virtual raid 0 i made. I'm pretty sure of the order of both disks. i'm launching a scan for a virtual mirror just in case but i think it was a raid0 configuration...