RAID 5 (hotspare)
Re: RAID 5 (hotspare)
With the old powersupply everything worked finde!
-
- Posts: 220
- Joined: Tue Oct 20, 2015 10:13 am
- Location: Providence, RI USA
- Contact:
Re: RAID 5 (hotspare)
So if the issue is only related to the power supply, then replacing it, it might just work and you'll have learned a good lesson in the importance of backing up data.
So I assume then that when it "failed" it just completely went dead? Did you try testing to see if there is voltage on the power supply?
So I assume then that when it "failed" it just completely went dead? Did you try testing to see if there is voltage on the power supply?
Re: RAID 5 (hotspare)
The LED of it does not Shine.
Re: RAID 5 (hotspare)
@Macnugget
The hot-spare could be a slight issue if it ever has been activated in the past.
But that's not a big deal, you'll easy locate it with R-Studio HEX viewer.
The hot-spare could be a slight issue if it ever has been activated in the past.
But that's not a big deal, you'll easy locate it with R-Studio HEX viewer.
Robert
Technical Manager @ Recupero Dati RAID FAsTec (Italy)
USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]
Technical Manager @ Recupero Dati RAID FAsTec (Italy)
USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]
Re: RAID 5 (hotspare)
SHORT FEEDBACK!!!
It was the powersupply!
I got a new one and all works fine!
Going to buy a backup Disk!
THX 4 your help!
It was the powersupply!
I got a new one and all works fine!
Going to buy a backup Disk!
THX 4 your help!
Re: RAID 5 (hotspare)
Thank you for the update
I'm glad they were not urgent data, for a company waiting so long for a powersupply to get again access to the data,
would have been a big damage
Regards
I'm glad they were not urgent data, for a company waiting so long for a powersupply to get again access to the data,
would have been a big damage
Regards
Robert
Technical Manager @ Recupero Dati RAID FAsTec (Italy)
USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]
Technical Manager @ Recupero Dati RAID FAsTec (Italy)
USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]