Page 2 of 2
Re: RAID 5 (hotspare)
Posted: Sun Jun 18, 2017 1:17 pm
by Macnugget
With the old powersupply everything worked finde!
Re: RAID 5 (hotspare)
Posted: Sun Jun 18, 2017 1:21 pm
by Data-Medics
So if the issue is only related to the power supply, then replacing it, it might just work and you'll have learned a good lesson in the importance of backing up data.
So I assume then that when it "failed" it just completely went dead? Did you try testing to see if there is voltage on the power supply?
Re: RAID 5 (hotspare)
Posted: Sun Jun 18, 2017 1:32 pm
by Macnugget
The LED of it does not Shine.
Re: RAID 5 (hotspare)
Posted: Mon Jun 19, 2017 1:21 am
by Corsari
@Macnugget
The hot-spare could be a slight issue if it ever has been activated in the past.
But that's not a big deal, you'll easy locate it with R-Studio HEX viewer.
Re: RAID 5 (hotspare)
Posted: Mon Jul 03, 2017 5:16 am
by Macnugget
SHORT FEEDBACK!!!
It was the powersupply!
I got a new one and all works fine!
Going to buy a backup Disk!
THX 4 your help!
Re: RAID 5 (hotspare)
Posted: Mon Jul 03, 2017 7:29 am
by Corsari
Thank you for the update
I'm glad they were not urgent data, for a company waiting so long for a powersupply to get again access to the data,
would have been a big damage
Regards