Page 2 of 2

Re: RAID 5 (hotspare)

Posted: Sun Jun 18, 2017 1:17 pm
by Macnugget
With the old powersupply everything worked finde!

Re: RAID 5 (hotspare)

Posted: Sun Jun 18, 2017 1:21 pm
by Data-Medics
So if the issue is only related to the power supply, then replacing it, it might just work and you'll have learned a good lesson in the importance of backing up data.

So I assume then that when it "failed" it just completely went dead? Did you try testing to see if there is voltage on the power supply?

Re: RAID 5 (hotspare)

Posted: Sun Jun 18, 2017 1:32 pm
by Macnugget
The LED of it does not Shine.

Re: RAID 5 (hotspare)

Posted: Mon Jun 19, 2017 1:21 am
by Corsari
@Macnugget

The hot-spare could be a slight issue if it ever has been activated in the past.

But that's not a big deal, you'll easy locate it with R-Studio HEX viewer.

Re: RAID 5 (hotspare)

Posted: Mon Jul 03, 2017 5:16 am
by Macnugget
SHORT FEEDBACK!!!


It was the powersupply!
I got a new one and all works fine!
Going to buy a backup Disk!

THX 4 your help!

Re: RAID 5 (hotspare)

Posted: Mon Jul 03, 2017 7:29 am
by Corsari
Thank you for the update

I'm glad they were not urgent data, for a company waiting so long for a powersupply to get again access to the data,

would have been a big damage

Regards