Imaging Linux MD RAID Drives on Windows 7 PC
Posted: Fri Jan 25, 2019 12:53 pm
Hi I am attempting to recover data from a QNAP 4 bay NAS In RAID 5. I have removed the drives and the first step is to create images on 4 spare HDD's before recovering data using R-Studio (I am using a Windows PC running WIN 7 with R-Studio). I have been advised to prevent the PC from trying to mount the NAS drives when connected by running CMD.EXE diskpart and commands "automount disable" and "automount scrub" to prevent possible data corruption.
My questions are:
1. Is it necessary to prevent the PC trying to automount the Linux MD RAID NAS drives in this way?
2. Given that the drives are Linux MD RAID, will R-Studio recognize them when running on a WIN 7 PC?
3. Or do I just connect the donor Linux drives via SATA and use "Create Image" in R-Studio as per the help documentation?
4. Is "Create Image" in R-Studio best for this step or is performing this in R-Drive Image preferable?
Advice appreciated!
My questions are:
1. Is it necessary to prevent the PC trying to automount the Linux MD RAID NAS drives in this way?
2. Given that the drives are Linux MD RAID, will R-Studio recognize them when running on a WIN 7 PC?
3. Or do I just connect the donor Linux drives via SATA and use "Create Image" in R-Studio as per the help documentation?
4. Is "Create Image" in R-Studio best for this step or is performing this in R-Drive Image preferable?
Advice appreciated!