What about VHD

A forum on data recovery using the professional data recovery software R-STUDIO.
Corsari
Posts: 131
Joined: Wed Aug 14, 2013 4:18 am

What about VHD

Post by Corsari » Mon Sep 23, 2013 7:09 pm

hello!

How is it about the possibility to scan and disk/disk-image for VHD signature, find the offset and directly opening the corresponding VHD file?

Is this feature available in R-Studio?

Thank you
Cor.
Robert
Technical Manager @ Recupero Dati RAID FAsTec (Italy)

USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]

Corsari
Posts: 131
Joined: Wed Aug 14, 2013 4:18 am

Re: What about VHD

Post by Corsari » Mon Sep 23, 2013 7:10 pm

On the other hand

is it available an working custom file type for VHD files?

Thank you

Cor.
Robert
Technical Manager @ Recupero Dati RAID FAsTec (Italy)

USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: What about VHD

Post by Alt » Tue Sep 24, 2013 5:47 am

You may recover data from a VHD disk in the following way:
1. If the disk can be attached, attach it, it appears in R-Studio's Drive panel as a disk. You may process it like a regular disk.
2. If it cannot, remember that such disk contains all attributes of a real logical disk. So, scan the disk (a logical or hard one) on which the VHD disk resided, and find it among Recognized partitions. It should be marked even with the red or green color. Open the recognized partition and recover data. If the VHD disk is damaged and require further processing, create a region on the host disk with the size and offset of the VHD disk (taken from its Properties tab) and scan it. You may take precise data in sectors from its Properties tab.
Tested for the MBR and GPT VHD disks.

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: What about VHD

Post by Alt » Tue Sep 24, 2013 6:06 am

And if this is a damaged VHD file, open it as an image and scan it.

Corsari
Posts: 131
Joined: Wed Aug 14, 2013 4:18 am

Re: What about VHD

Post by Corsari » Thu Oct 03, 2013 2:57 pm

Thank you for the reply

But we are in doubt about two unknowns:
- maybe one disk in the RAID set is un-consistent, out of date (since one out of 5 is gone, and we are using "missing disk")
- maybe LVM2 descriptors are damaged (again sign of the same above un-sure disk)

We are still investigating.

C.
Robert
Technical Manager @ Recupero Dati RAID FAsTec (Italy)

USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]

Post Reply