Server 2000, dynamic disks, and MS Virtual server

Disk backup and restore, partition imaging and cloning, and drive copy using R-Drive Image.
Forum rules
Discussion on the R-Drive Image software
todd1561

Server 2000, dynamic disks, and MS Virtual server

Post by todd1561 » Thu Feb 12, 2009 12:39 pm

A few questions:

1. I have a Windows 2000 server and when I try to perform a backup I cannot get past the "Backup options" page. I cannot select a snapshot provider and the "Next" button is grayed out. What is your support of Windows 2000?

2. I have a Windows 2003 server with a dynamic disk on hardware RAID 5. When I try to backup this drive it takes far too long, in the range of an entire day to backup a drive with 160GB of data. I have other similar servers that have standard partitions and these backup in a couple hours. Why does it take so long to back up a dynamic disk and is there anything I can do?

3. If I backup a Windows Virtual server host machine, can I assume the virtual machines held on it will be backed up as well, since their VHD files are stored on the server that is being backed up?

Thanks,
Todd

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Server 2000, dynamic disks, and MS Virtual server

Post by Alt » Tue Feb 17, 2009 10:20 am

1. Start R-Drive Image in the debug mode ("R-DriveImage.exe -debug") and close it. There will be a file rdi_<date>_<time>.log Contact the technical support with it and provide the reference to this topic.
2. We are trying to figure the problem out.
3. Yes, I believe so, although I would make a test to be sure.

Todd1561

Re: Server 2000, dynamic disks, and MS Virtual server

Post by Todd1561 » Wed Feb 18, 2009 1:43 pm

Thanks for the reply. As for #1, I was able to get the R-Drive snapshot provider to show up after rebooting the server. However, I find that when I run a job on this Win2k Server is fails a couple minutes in (after having written a couple gigs to the image file) saying it "could not commit".

Thanks,
Todd

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Server 2000, dynamic disks, and MS Virtual server

Post by Alt » Thu Feb 19, 2009 10:28 am

Can that be that the target disk becomes temporally unavailable?

todd1561

Re: Server 2000, dynamic disks, and MS Virtual server

Post by todd1561 » Thu Feb 19, 2009 11:02 am

I guess it could be, but I've run it several times with the same result. I'm also backing up 6 other servers to the same drive (not at the same time) without issue.

Todd

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Server 2000, dynamic disks, and MS Virtual server

Post by Alt » Fri Feb 20, 2009 5:23 am

About Issue 2. Can you change the snapshot provider on the Backup Options panel and see the how that affect the backup speed?

todd1561

Re: Server 2000, dynamic disks, and MS Virtual server

Post by todd1561 » Fri Feb 20, 2009 7:32 pm

This is Windows 2000 Server, which is pre-VSS, so no.

Todd

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Server 2000, dynamic disks, and MS Virtual server

Post by Alt » Sat Feb 21, 2009 5:39 am

But in Issue 2 you wrote that was Server 2003.

todd1561

Re: Server 2000, dynamic disks, and MS Virtual server

Post by todd1561 » Sat Feb 21, 2009 7:29 am

Oh, woops, misread your question. All of my servers other than the one Windows 2000 server are Windows 2003, so I use the VSS snapshot provider on them. I'll try using the R-Drive provider on the one with dynamic disks are report back.

Thanks,
Todd

Todd1561

Re: Server 2000, dynamic disks, and MS Virtual server

Post by Todd1561 » Sat Feb 21, 2009 4:15 pm

If anything it took a little longer, 8 hours to backup 160 GBs using the R-Drive snapshot provider. This backup is saving to a SATA hard drive on another server over a gigabit network. Both servers are on the same Cisco 3550-12T gigabit switch with their NIC and switch interfaces manually set to 1000 Mbit, full duplex. I have other servers backing up similar amounts of data in the same fashion, saving to the same server, which take considerably less. The only difference is the dynamic disk.

Todd

Post Reply