New Drive not recognized

Disk backup and restore, partition imaging and cloning, and drive copy using R-Drive Image.
Forum rules
Discussion on the R-Drive Image software
midiman

New Drive not recognized

Post by midiman » Thu Jul 14, 2011 2:24 pm

I have a PC with a RAID configuration. I just installed another SATA HD of 2TB as a regular non-RAID drive which works perfectly in WinXP. I thought I would make 2 image files from the 2 RAID drives to the new installed HD - this process always worked before when I made images to an external USB2 drive using the two R-DRIVE IMAGE boot floppies.
However, the new drive is recognized in the screen for selecting the partitions for copying, but it is NOT appearing in the screen showing the drives where the image is to be stored. The new drive is a single, primary partition of almost 2TB. Why doesn't it appear in the second screen?

Alt
Site Moderator
Posts: 3129
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: New Drive not recognized

Post by Alt » Fri Jul 15, 2011 12:26 pm

I assume you have formatted the new drive properly.
Which version of R-Drive Image do you have? Chances are high that you won't have this problem if you use the latest one.

Post Reply