R-Studio For Linux Missing 270,000 Files and 5.5 GB Of Data

A forum on data recovery using the professional data recovery software R-STUDIO.
tombuhn
Posts: 8
Joined: Mon Aug 30, 2010 5:55 pm

R-Studio For Linux Missing 270,000 Files and 5.5 GB Of Data

Post by tombuhn » Thu Feb 23, 2012 7:15 pm

I have a Mac HFS Formatted Hard Drive that shows and mounts in Linux and did the following under Linux Ubuntu:

Scanned partition to be recovered
Set R-Studio to NOT show deleted files
Selected all Files and did Recover Marked Files
Recovered files to another hard drive with no other data on it
I use a program named Beyond Compare to then compare the HFS Drive and the Drive that I saved the files to
There were about 270,000 files totaling about 5.5 GB that were not recovered.
I did get an error for about 350 files and that Error was: The Operation was failed Error #1001

I am hoping I missed something as this really scares me that R-Studio would miss so much data that is clearly visible on a drive that I recovered data from. R-Studio shows some of these files in the recovery tree. Could it be that the files were recovered to a NTFS formatted hard drive? I wouldn't think so! but I guess it could be an issue.

Alt
Site Moderator
Posts: 2271
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by Alt » Fri Feb 24, 2012 2:45 am

Did you use the latest version?

tombuhn
Posts: 8
Joined: Mon Aug 30, 2010 5:55 pm

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by tombuhn » Fri Feb 24, 2012 11:30 am

I am pretty sure I was, it shows a release date of Nov 4th , 2011 on your site and I purchased the software after that date so I am pretty sure I am, I can check later. Was this a known issue for an earlier version?

Alt
Site Moderator
Posts: 2271
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by Alt » Fri Feb 24, 2012 11:54 am

tombuhn wrote:I am pretty sure I was, it shows a release date of Nov 4th , 2011 on your site and I purchased the software after that date so I am pretty sure I am, I can check later. Was this a known issue for an earlier version?
No, but we made a serous overhaul of our HFS module. I'll contact our developers with this case.

tombuhn
Posts: 8
Joined: Mon Aug 30, 2010 5:55 pm

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by tombuhn » Fri Feb 24, 2012 12:30 pm

It is build 1.0.241

Ok here is what I am going to do. The first attempt was to recover the data to a drive formatted in NTFS as it is just easier in Linux, but now I am rescanning the drive and I am going to recover to a hard drive formatted in HFS with journaling tourned off so linux can write to it. I will see if that makes any difference.

Will up date and let you know hopefully later today.

tombuhn
Posts: 8
Joined: Mon Aug 30, 2010 5:55 pm

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by tombuhn » Fri Feb 24, 2012 6:34 pm

Ok, after reformating the hard drive (in which I am recovering the files to) to HFS and then rescanning the hard drive to recover and exporting those files out, I still get the same results. In comparing the folder / file structure between the hard drive being recovered (Which again can be read in Linux without issues) and the recovered files there are again about 5.5 GB and 270,000 files that are missing in the recovery. Although This time I did not get any Error #1001 error codes.

Now what?

tombuhn
Posts: 8
Joined: Mon Aug 30, 2010 5:55 pm

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by tombuhn » Sat Feb 25, 2012 9:46 pm

Ok I figured out the issue, it is the hard links / symlinks, R-Studio doesn't recover those right. Is there away around this?

Alt
Site Moderator
Posts: 2271
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by Alt » Sun Feb 26, 2012 4:11 am

We'll check that issue.

eazycut

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by eazycut » Tue Dec 09, 2014 10:39 am

Hi, is there an fix for this error 1001. I have the same problem and post is over 2 years old?
This is not good. If i knew this i would NOT buy your software.

So what now then? End of using R-studio? or you going to do something about it after this old post 2 years????

A customer that is not happy.

euggie

Re: R-Studio For Linux Missing 270,000 Files and 5.5 GB Of D

Post by euggie » Thu Apr 28, 2016 12:07 pm

During recovering all files on drive - zillions of "The operaion was failed. (error #1001), why is that happening ? The file names seem to be ok!
Is it the bug? The free version could not reveal such problem so I've bought a license for $80 and got that. What should I do?

---------
Recovering Resource of /Volumes/WDP/Новая папка/$$$Folder387615/test_udp.pyc failed. The operation was failed. (error #1001)
Recovering Resource of /Volumes/WDP/Новая папка/$$$Folder389425/cs-dired-ref.tex failed. The operation was failed. (error #1001)
Recovering Resource of /Volumes/WDP/Новая папка/$$$Folder390434/viper-macs.elc failed. The operation was failed. (error #1001)
Recovering Resource of /Volumes/WDP/Новая папка/$$$Folder390667/nnimap.elc failed. The operation was failed. (error #1001)
Recovering Resource of /Volumes/WDP/Новая папка/$$$Folder391812/texnfo-upd.elc failed. The operation was failed. (error #1001)
Recovering Resource of /Volumes/WDP/Новая папка/$$$Folder404741/test_float.py failed. The operation was failed. (error #1001)
---------
Seems to me no .dng file was recovered - the only type i needed to recover

Post Reply