HP ML350 G6 with P410i Controller

Disk backup and restore, partition imaging and cloning, and drive copy using R-Drive Image.
Forum rules
Discussion on the R-Drive Image software
uek
Posts: 1
Joined: Tue Oct 06, 2015 8:14 am

HP ML350 G6 with P410i Controller

Post by uek » Tue Oct 06, 2015 9:31 am

Hello,

I have an HP server with Raid Controller P410i. I want to create an image. If the controller of R-Drive supported?

regards Marco

Alt
Site Moderator
Posts: 2271
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: HP ML350 G6 with P410i Controller

Post by Alt » Wed Oct 07, 2015 8:43 am

If the server runs under Windows, R-Drive Image accesses all hardware through the system drivers. Obviously, the Windows version of R-Drive Image will work with the controller.
It's better to test the startup version of R-Drive Image directly on the server. R-Drive Image has a 30-day full-functioning trial period, so it's a good idea to try it. Actually, you don't have to do anything that may put the data on the server at risk. If you just start the server with the startup version, and it sees the volume on the controller, most likely the startup version of R-Drive Image will work with it normally.

Post Reply