A forum on data recovery using the professional data recovery software R-STUDIO.
- Posts: 31
- Joined: Fri Oct 31, 2014 11:37 am
Is there a way in R-Studio to find files which are related to bad sectors without trying to recover them? How?
Thanks a lot!
- Posts: 204
- Joined: Tue Oct 20, 2015 10:13 am
- Location: Providence, RI USA
I don't think this is possible. I know you can do that with Data Extractor software, but you need a PC-3000 to even use that software. If a drive is known to have bad sectors it's usually best to image it in Linux using ddrescue first, then do the logical recovery using R-Studio. But, no way to know for sure which files were hit.
- Posts: 66
- Joined: Wed Jul 09, 2014 9:05 am
If you image the drive with DeepSpar Imager, R-Studio will show which files are good and bad. Unfortunately, they still haven't added a way to filter the file results so you can show only good or only bad files.
- Site Moderator
- Posts: 2695
- Joined: Tue Nov 11, 2008 2:13 pm
Generally, you can find which files are in bad sectors only after a disk scan or imaging.