Finding parameters for Raid 0.

Discussions on using the professional data recovery program R-STUDIO for RAID re-construction, NAS recovery, and recovery of various disk and volume managers: Windows storage spaces, Apple volumes, and Linux Logical Volume Manager.
Posts: 1
Joined: Fri May 07, 2010 12:02 pm

Finding parameters for Raid 0.

Post by phillipfranco55 » Fri May 07, 2010 12:14 pm

Ive read this guide ... ndex.shtml but it is for raid 5 and im getting all 0's when it tells me to change the templates drop down box to "Boot Sector NTFS" on my raid 0 (which is the drive with the MBR).
The only parameters I know for sure is which drive has the MBR, and I am having trouble finding the rest of the parameters using this guide. So I was wondering if there are different steps to finding the Raid 0 Parameters than using the guide here for raid 5. I am using images of the data on the drives to do the hex edit.

Site Moderator
Posts: 3181
Joined: Tue Nov 11, 2008 2:13 pm

Re: Finding parameters for Raid 0.

Post by Alt » Mon May 10, 2010 6:13 am

What is the RAID controller?

Post Reply