A few days ago my Raid 0 failed when i had to clear my BIOS. I have been trying to recover it with other software, when that failed i was pointed towards R-studio.
After reading some of the guides i figured i'd give it a shot and downloaded the demo and started it up.
Now something very confusing is displayed on the Device View. Most of my Drives have the wrong Partitions, if that is the correct description, associated with them.
The Array had been made using 2x 1.5TB Seagate HDD
Here is a Screen Shot:
![Surprised :o](./images/smilies/icon_e_surprised.gif)
![Image](http://img225.imageshack.us/img225/1793/rstudioscreen1.th.jpg)
Here is how the actual physical and raid drives were originally:
IntelRaid 0 Vol. is the volume I made using the Intel Matrix on my Mobo.
ST31500341 is correctly displayed as a 1.5 TB Drive
WDC WD1500 is also displayed correctly
SeagateST3300831 should be displaying as my 2nd 1.5 TB Drive
The partition "B" listed under SeagateST33 is actually a PATA 300GB drive. It should not be listed under the SeagateST33
The volume assigned the letter "G" is the only drive i see in "My Computer" besides the WDC WD1500 & the "B" (PATA 300GB)
I'm curiouse, is it still possible to reconstruct this using R-Studio?
I understand that inherently Raid0 is unsafe, however I very willing to try if there is any chance.
Any advice would be greatly appreciated.
![Smile :)](./images/smilies/icon_e_smile.gif)
Thanks,
Araeven