R Studio question.

A forum on data recovery using the professional data recovery software R-STUDIO.
bharath
Posts: 1
Joined: Thu Sep 24, 2009 2:49 pm

R Studio question.

Post by bharath » Thu Sep 24, 2009 4:11 pm

I just downloaded R Studio demo version to check if it can detect my hard drive that crashed because of a power failure. I tried connecting it using a SATA to USB 2.0 adapter. Before I decide to invest in R Studio I have a couple of questions

1) Does R Studio work if I connect a hard drive using a USB 2.0 adapter
2) Will R Studio be able to recover hard disk data if my bios doesnt detect the hard drive, it says hard disk failure.

Any help on this appreciated.

Alt
Site Moderator
Posts: 2271
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: R Studio question.

Post by Alt » Fri Sep 25, 2009 2:49 am

1. Yes, if the hardware of a connected HDD works properly. Your computer should see it in the Windows Disk Manager. It does not matter whether Windows sees or not logical disks on that HDD. Bad blocks may affect the chances to recover files, but R-Studio still will work with the HDD.
2. No. If your system does not see a properly working HDD.

Post Reply