Recover files from Synology part DMG images

Discussions on using the professional data recovery program R-STUDIO for RAID re-construction, NAS recovery, and recovery of various disk and volume managers: Windows storage spaces, Apple volumes, and Linux Logical Volume Manager.
Illuminated
Posts: 1
Joined: Wed Apr 15, 2015 7:40 am

Recover files from Synology part DMG images

Post by Illuminated » Wed Apr 15, 2015 8:35 am

Hi

I try to recover files from a crashed Synology Raid5 Volume.
It is a 10 Disk 30 TB Volume/Raid5.

I took images via Mac/Disk Utility off the 10 disks which are now DMGs automatically split into 3 files each due to size (Disk**.dmg, Disk**.002.dmgpart,Disk**.003.dmgpart)

Now for the Questions:
1. When I add the images to R-Studio will it identify those 3 parts as one big image? Cause when I add the main Images (Disk**.dmg) it only says 10tb size instead of the around 30tb it should be.

2. Are there any experience with Synology Nas Raids? Do you know which exact Parameters the Raids use in general?
Only found some hints on the web and the support did not answer yet.

Due to the Size of the Raid and the Number of disks I cant just let it find out automatically unfortunately cause it takes over 4 days for just one scan.
Using R-Studio for Mac btw.

Any help greatly appreciated

Cheers

Alt
Site Moderator
Posts: 2271
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: Recover files from Synology part DMG images

Post by Alt » Tue Apr 21, 2015 12:53 pm

You cannot open dmg files directly in R-Studio, even in its Mac version. But you can mount those files in a Mac system, and R-Studio for Mac will see them. If you don't have the Mac version, you may mount them in a Mac system, run R-Studio Agent for Mac, and connect to that Mac from R-Studio for Windows or Linux.

Post Reply