Create Virtual Block RAID & Autodetect

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:
BBCode is ON
[img] is ON
[url] is ON
Smilies are ON
Topic review
   

Expand view Topic review: Create Virtual Block RAID & Autodetect

Re: Create Virtual Block RAID & Autodetect

by Alt » Tue Nov 08, 2022 3:54 pm

cramerhwood wrote: Tue Nov 08, 2022 3:37 pm So, my guess at this point is that it was originally a RAID 5 and it was later improperly formatted as a RAID 1 or using only 2 of the disks.
Nothing can be said unless the data on the disks has been inspected. That's why I recommend you to go to our techsupport.

Re: Create Virtual Block RAID & Autodetect

by cramerhwood » Tue Nov 08, 2022 3:37 pm

So, my guess at this point is that it was originally a RAID 5 and it was later improperly formatted as a RAID 1 or using only 2 of the disks.

Re: Create Virtual Block RAID & Autodetect

by Alt » Tue Nov 08, 2022 3:07 pm

cramerhwood wrote: Mon Nov 07, 2022 8:59 pm Ok. What's an ldm volume?
LDM (Logical Disk Manager) = Windows software RAID in your case. There may be other types of LDM volumes in other cases.

Re: Create Virtual Block RAID & Autodetect

by cramerhwood » Mon Nov 07, 2022 8:59 pm

Ok. What's an ldm volume?

Re: Create Virtual Block RAID & Autodetect

by Alt » Mon Nov 07, 2022 2:26 pm

Stop creating any virtual Block RAID - that won't do any good. I can tell from your video that R-Studio found LDM partitions in two images. R-Studio normally should've created an LDM volume automatically, but didn't, for reason unclear to me. That needs a more detailed investigation into this problem. Please contact our techsupport with this problem and provide a link to this topic. They'll help you to solve the problem. They may request some information about your system, which I think isn't a good idea to publish in our forum.

Re: Create Virtual Block RAID & Autodetect

by cramerhwood » Sat Nov 05, 2022 4:06 pm

It was an attempt to force them into a block, but I had no control over the RAID settings like I do with the other drives.

Re: Create Virtual Block RAID & Autodetect

by Alt » Sat Nov 05, 2022 3:37 pm

What is Virtual Block RAID1?

Re: Create Virtual Block RAID & Autodetect

by cramerhwood » Sat Nov 05, 2022 3:29 pm

Thank you for the help. Here is a screen capture of me showing how the process works with any drive other than the imaged drives. You can see that the interface just disappears and is no longer accessible.

https://youtu.be/c-e6dWocEiM

Re: Create Virtual Block RAID & Autodetect

by Alt » Sat Nov 05, 2022 2:23 pm

I'd like to see the panel after you load the images just into R-Studio, not to try to create any virtual RAID. Just loaded images.

Re: Create Virtual Block RAID & Autodetect

by cramerhwood » Fri Nov 04, 2022 6:37 pm

I would like to see this too. I can load physical drives, but the images I made don't seem to load properly. If I try to drag them or add them from the autodetect raid block interface, the whole interface disappears. If I test it with other drives, including jump drives, they add just fine.

Top