Create Virtual Block RAID & Autodetect
-
cramerhwood
- Posts: 8
- Joined: Mon Oct 31, 2022 12:04 pm
Re: Create Virtual Block RAID & Autodetect
It was an attempt to force them into a block, but I had no control over the RAID settings like I do with the other drives.
Re: Create Virtual Block RAID & Autodetect
Stop creating any virtual Block RAID - that won't do any good. I can tell from your video that R-Studio found LDM partitions in two images. R-Studio normally should've created an LDM volume automatically, but didn't, for reason unclear to me. That needs a more detailed investigation into this problem. Please contact our techsupport with this problem and provide a link to this topic. They'll help you to solve the problem. They may request some information about your system, which I think isn't a good idea to publish in our forum.
-
cramerhwood
- Posts: 8
- Joined: Mon Oct 31, 2022 12:04 pm
Re: Create Virtual Block RAID & Autodetect
Ok. What's an ldm volume?
Re: Create Virtual Block RAID & Autodetect
LDM (Logical Disk Manager) = Windows software RAID in your case. There may be other types of LDM volumes in other cases.
-
cramerhwood
- Posts: 8
- Joined: Mon Oct 31, 2022 12:04 pm
Re: Create Virtual Block RAID & Autodetect
So, my guess at this point is that it was originally a RAID 5 and it was later improperly formatted as a RAID 1 or using only 2 of the disks.
Re: Create Virtual Block RAID & Autodetect
Nothing can be said unless the data on the disks has been inspected. That's why I recommend you to go to our techsupport.cramerhwood wrote: Tue Nov 08, 2022 3:37 pm So, my guess at this point is that it was originally a RAID 5 and it was later improperly formatted as a RAID 1 or using only 2 of the disks.