How to Access files from a broken BlackArmor NAS 110

Discussions on using the professional data recovery program R-STUDIO for RAID re-construction, NAS recovery, and recovery of various disk and volume managers: Windows storage spaces, Apple volumes, and Linux Logical Volume Manager.
gruby
Posts: 2
Joined: Thu Nov 06, 2014 2:58 pm

How to Access files from a broken BlackArmor NAS 110

Post by gruby » Thu Nov 06, 2014 3:28 pm

The network portion of my BlackArmor NAS 110 broke. The Mfr was no help, but did tell me the NAS uses a Linux file system. I purchased R-Studio (for Windows) and installed the NAS drive in a separate enclosure connected to my Laptop via USB. R-Studio seems to see something, but wont let me SCAN to drive to figure it out. help

Alt
Site Moderator
Posts: 2271
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: How to Access files from a broken BlackArmor NAS 110

Post by Alt » Mon Nov 10, 2014 11:06 am

Can you post a screenshot of the Drives pane in R-Studio's main panel?

gruby
Posts: 2
Joined: Thu Nov 06, 2014 2:58 pm

Re: How to Access files from a broken BlackArmor NAS 110

Post by gruby » Mon Nov 17, 2014 5:50 pm

See attached screen shot. Thanks in advance for any advice.
You do not have the required permissions to view the files attached to this post.

Alt
Site Moderator
Posts: 2271
Joined: Tue Nov 11, 2008 2:13 pm
Contact:

Re: How to Access files from a broken BlackArmor NAS 110

Post by Alt » Tue Nov 18, 2014 7:14 am

Looks like the ASMT either is connected incorrectly through USB, or has some hardware issues. Or maybe the NAS has an internal hardware encryption?
I'd try to connect the disk through a SATA port to the computer, if it's possible.

Post Reply