Hi,
We are trying to rebuild an 8 disk RAID 6 set from a QNAP TS 869 Pro.
I was wondering if anyone know the default block size for these? the box has failed, so the data should be there if we can configure right.
Also, does it use reed solomon, or xor?
Any configuration help would be great.
block size and configuration for 8 bay QNAP
Re: block size and configuration for 8 bay QNAP
Please don't duplicate posts
What has been the source of the problem?
Have you played with the drives?
Some premises are needed.
E.g. Are all the drives healthy?
Thank you
What has been the source of the problem?
Have you played with the drives?
Some premises are needed.
E.g. Are all the drives healthy?
Thank you
Robert
Technical Manager @ Recupero Dati RAID FAsTec (Italy)
USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]
Technical Manager @ Recupero Dati RAID FAsTec (Italy)
USEFUL RULES and GUIDELINES
1) What to check BEFORE begin a disk image/clone process [link]
2) Disks that are too slow while imaging/cloning them [link]
3) All my posts on this forum [link]